Lelit Bianca V3 handleiding
Handleiding
Je bekijkt pagina 20 van 34
20
LELIT Bianca - PL162T
13. Technical menu
The technical menu offers extra customization settings for the more expert us-
ers. Please remember that these settings require time before seeing results in
the cup of coffee, however if you think that you changed your machine values
too much, all the settings can be restored with the following procedure:
1. With the machine turned OFF, hold pressed the button
2. Switch the machine ON
3. Wait until the LCC shows KPc value
Note. Keep pressed and until KPc value is shown on the display to be
sure that you have entered the technical menu and not resetting your machine.
Note. If you do not press the button, you have a factory reset of the LCC and
you will have to re-enter and/or check all parameters.
PID
PID stands for Proportional-Integral-Derivative.
Temperature is extremely important when brewing coffee. While different brew
methods and roasts demand different temperature, stability is the key.
All in all, a machine with PID control monitors itself to ensure temperature
stability and control.
A traditional thermostat tends to hit a desired temperature, then turn off the heat-
ing element as the temperature rises above its target. Then it will kick back on as
the temperature falls below the set value. These results in uneven temperatures
can lead to inconsistent shot quality in a coffee machine, like LELIT Bianca.
PID controllers use the PID algorithm to keep your machine at the proper brew
temperature. This also means that you can directly control the temperature of
the machine. The temperature detected inside the boilers is the one visible on
the display and it is subjected to all the variations happening inside the boilers.
Note. PID is an algorithm that regulates the boiler temperature according to
the temperature detected by the probe (NTC) located inside the boiler. PL162T
having two boilers has therefore two working PID: the letter c at the end of the
parameter (e.g., KPc) refers to coffee boiler; the letter s at the end of the param-
eter (e.g., KPs) refers to steam boiler.
Bekijk gratis de handleiding van Lelit Bianca V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lelit |
| Model | Bianca V3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2848 MB |
