Leitz TruSens Z-3500H handleiding
Handleiding
Je bekijkt pagina 16 van 286
16
WASHING THE PREFILTER
1. The Carbon indicator will glow red when it is time to replace
the Carbon layer.
2. Gently peel away the Prefilter from the fastener strips (Fig. E).
3. Gently peel away the used Carbon layer from the fastener
strips (Fig. F).
4. Wrap a new Carbon layer around the filter drum and attach
to the same fastener strips (Fig. G).
5. Replace the Prefilter by wrapping it around the Carbon layer
and attach to the fastener strips (Fig. H).
6. Once the purifier is powered-on, hold the Reset button until
the red Carbon indicator turns off.
1. We recommend that you visually inspect the Prefilter every
month, and clean as needed. At minimum, you should
hand wash the Prefilter every time you change the Carbon
filter.
2. Gently peel away the Washable Prefilter from the fastener
strips (Fig. E).
3. Gently rinse with running water – allow Prefilter to air dry
before re-installing.
4. Replace the Prefilter by wrapping it around the filter drum
and attach to the fastener strips (Fig. H).
Note: Carbon filter 3-pack (on page 14) will cover 3 Carbon changes
between replacing the entire HEPA drum filter assembly (on page 15).
Fig. E
Fig. F
Fig. G
Fig. H
REPLACING CARBON FILTER
Bekijk gratis de handleiding van Leitz TruSens Z-3500H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Leitz |
| Model | TruSens Z-3500H |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 23511 MB |
Caratteristiche Prodotto
| Soort bediening | Buttons, Touch |
| Kleur van het product | Wit |
| Ingebouwd display | Ja |
| Timer | Ja |
| Gewicht | 5700 g |
