Lectrosonics SMDWB-E06-B1 handleiding
Handleiding
Je bekijkt pagina 15 van 30
Digital Hybrid Wireless Belt-Pack Transmitters
Rio Rancho, NM 15
NOTE: This termination is intended for UHF
transmitters only. VHF transmitters with
5-pin jacks require a different termination.
Lectrosonics lavaliere microphones are
terminated for compatibility with VHF and UHF
transmitters, which is different from what is
shown here.
Microphone Cable Termination
for Non-Lectrosonics Microphones
TA5F Connector Assembly
Mic Cord Stripping Instructions
1
23
4
5
VIEW FROM SOLDER
SIDE OF PINS
0.3"
0.15"
Crimping to Shield and Insulation
Shield
Insulation
Strip and position the cable so that the clamp
can be crimped to contact both the mic cable
shield and the insulation. The shield contact
reduces noise with some microphones and the
insulation clamp increases ruggedness.
Crimp these
ngers to
contact the
shield
Crimp these
ngers to
clamp the
insulation
Bekijk gratis de handleiding van Lectrosonics SMDWB-E06-B1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lectrosonics |
| Model | SMDWB-E06-B1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7735 MB |
