Lectrosonics M2T-X handleiding
Handleiding
Je bekijkt pagina 10 van 24

M2T, M2TND, M2T/E01, M2TND/E01, M2T/E02, M2T/E06
LECTROSONICS, INC.
10
Screen will alert user if scan is unsuccessful.
Sync FlexList Prole
FlexList allows the user to set up a list of proles, by
name, in the receiver. This allows quick and easily access
to listen to any of the mixes on site.
After putting the receiver into Sync Flex mode, choose
the function and then use the transmitter to send the
prole over IR:
Stereo Mix: The current receiver settings are sent as
is, except the mix mode is set to stereo.
Mono Ch. 1 Only: The current receiver settings are
sent as is, except the mix mode is set to Mono
Ch. 1.
Mono Ch. 2 Only: The current receiver settings are
sent as is, except the mix mode is set to Mono
Ch. 2.
NOTE: See Mix Mode for more information.
Also see Page 20 for details on creating, editing,
and storing Flexlists within Wireless Designer
Sync Key
Allows sending of encrption key to other devices, or get-
ting key from another device using IR sync.
Key Type
Allows selection of encryption key policy: universal,
shared, standard, or volatile. Allows creation of new key
or deletion of the current key.
Front Panel Setup
Front panel settings may be customized as follows:
• LCD brightness
• Front panel lock
• Startup RF state
• Quick Sync Mode
Sync All: A long (1 second) press of
either the A1, A2, B1 or B2 buttons sends all
RX1 settings.
Split Mono: A long press of the A1or B1 buttons
sends all RX1 settings with the mix mode forced to
Mono Ch. 1. A long press of the A2 or B2 buttons
sends all RX1 settings with the mix mode forced to
Mono Ch. 2.
Network Settings
Allows the user to set IP address or other network set-
tings when needed.
NOTE: New network settings require the unit
to reboot to take effect. Making a change and
pressing the BACK key will prompt the user to
Reboot Now, Save and Exit, or Discard and Exit.
Edit Names
Edit names to match talent for easy location in the Flex-
List or easily identify multiple M2T, M2T/E01, M2T/E02,
M2T/E06 transmitters in a rack.
Bekijk gratis de handleiding van Lectrosonics M2T-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Lectrosonics |
Model | M2T-X |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 10631 MB |