Lectrosonics HMa/E01 handleiding
Handleiding
Je bekijkt pagina 12 van 24
HMa, HMa-941, HMa/EO1, HMa/E02, HMa/E06, HMA/E07-941, HMa/X
LECTROSONICS, INC.
12
• Audio input level (gain)
• Operating frequency
• Panel Lock/Unlock
• RF power output
• Low frequency roll-o lter
• Power LED on/o
Enable the remote control function by holding the
DOWN arrow then pressing the AUDIO and FREQ but-
tons at the same time. Use the arrow buttons to select
on to enable the function, or oFF to disable the function.
If a remote control signal is detected but the function
is turned o, the message rc oFF will be displayed
briey on the transmitter’s LCD to conrm that a valid
signal was received, but that the control function is not
enabled. If a remote control setting is delivered to the
transmitter that is not available, such as SLEEP/UN-
SLEEP in the HMa, the display on the transmitter will
show – – – – – – and then return to the previous screen.
The usable distance between the microphone and the
smart phone will vary with the input gain setting on the
transmitter and the volume control setting on the Smart-
phone.
NOTE: Any microphone/transmitter within
range of the Smartphone will “hear” and
execute the remote control command.
Be careful to make sure only the desired
microphone/transmitter is within range when
delivering the audio tone.
Bekijk gratis de handleiding van Lectrosonics HMa/E01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lectrosonics |
| Model | HMa/E01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5848 MB |
