Handleiding
Je bekijkt pagina 4 van 11
4
2.3 Correct use and Operation
For safety reasons, this appliance may only be used after
it has been installed.
Reliable and safe operation of this appliance can only be
assured if it has been connected to the main electricity
supply.
Before using the appliance, ensure that all packaging
materials are removed from the appliance and make
sure that the connection data on the data plate [voltage
(V) and frequency (Hz)] indicated on the appliance
corresponds to the voltage and frequency of the power
supply in your household. Consult a qualified electrician
if in doubt.
D
Prevent water ingress. Never sprinkle or flush the cooler
using water, place the cooler in an area exposed to
moisture water sprinkling, or fill the cooler
with water, so as to avoid impairment of the electric
insulation of the cooler. Furthermore, failing to follow
such requirements may lead to electric shock and fire,
or other accidents.
O NOT store or spray flammable materials in the
appliance or near this appliance while it is in operation
(e.g. aerosols).
WARNING
After the wine cabinet is put into operation, never touch its
inner surface, especially when your hand is wet; otherwise
the skin may stick onto the inner surface to get injured.
Regularly clean surfaces that can come in contact with
food and accessible drainage systems. If the refrigerating
appliance is left empty for long periods, switch off,
clean, dry, and leave the door open to prevent mould
developing within the appliance.
Opening the door for long periods can cause a significant
increase of the temperature in the compartments of the
appliance.
Cracks, fissures or fractures in the panels
can damage the underlying electronics. Switch off and
disconnect the appliance immediately.
The refrigerant isobutane (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas with a
high level of environmental compatibility, which is
nevertheless flammable. During transportation and
installation of the appliance, ensure that none of the
components of the refrigerant circuit becomes damaged.
2.4 Disassembling and Disposal of the
Appliance
(see the “Environmental Tips” section for best practices on
disposing of this appliance).
The device must only be disassembled by trained
specialists who are familiar with and comply with the
standard national regulations and supplementary
regulations of the local utility companies.
2.5 Accessories and Spare
Work on electrical components must only be conducted by
trained electrical personnel.
parts
Incorrect components can lead to personal injury or
damage to the appliance. Only use original Lecavist
spare pa rts for re pairs.
Modifications, additions or alterations to the appliance
can lead to safety risks. If spare parts or accessories from
other manufacturers are used, the warranty will be
invalidated, and
Lecavist
cann ot acce pt liabilit y.
Please check www.lecavist.com f or m ore i nformation.
www.lecavist.com
2.6 Use of Extension Cord
•
Avoid the use of an extension cord because of potential
safety hazards under certain conditions. If it is necessary to
use an extension cord, use only a 3-wire extension cord
that has a 3-blade grounding plug and a 3-slot outlet that
will accept the plug. The marked rating of the extension
cord must be equal to or greater than the electrical rating
of the appliance.
Bekijk gratis de handleiding van LeCavist LEK21PV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LeCavist |
| Model | LEK21PV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1821 MB |
