Handleiding
Je bekijkt pagina 11 van 19
10
BEFORE USE
Wait 24 hours before starting your wine fridge.
We recommend that you leave your wine fridge upright, clean it with soapy water and leave it open to
eliminate residual odors.
Recommendations:
• Place the fridge in a cool place away from sunlight and heat sources.
• Certain parameters such as room temperature, door opening time or the number of bottles stored inside
could affect the internal temperature of your wine fridge. We recommend that you check the internal
temperature regularly and adjust it if necessary.
• Do not cover the vents.
Operating noise:
To reach the desired temperature, this wine fridge, like all wine fridges with compressor cooling systems, can
produce certain noises, which are normal operating noises.
• Gurgling noise: caused by the refrigerant gas circulating in the refrigeration area of the unit.
• Cracking noise: resulting from the contraction and expansion of the gas to produce the cold.
The perception of noise by the individual is directly related to the environment in which the wine fridge is located.
Noise in normal operation is not a cause of the warranty's application.
USING YOUR WINE FRIDGE
A. Loading your wine fridge
• You can load your wine bottles in single or double rows.
• For loading, take note of the following: if you don’t have enough bottles to completely fill your wine fridge,
it’s best to spread the load over the entire height of the wine cellar to avoid a thermal imbalance at the
top or bottom of the fridge.
• The balanced distribution of bottles throughout the height of the wine cellar is the most efficient way to use
the energy of the appliance.
• The bottle capacity is expressed in bottles of the “ Bordeaux” type. If larger bottles are stored, or if
additional shelves are used, the maximum bottle capacity is reduced.
• To accommodate the largest type of bottle or increase the capacity of the cellar by stacking the bottles
when necessary, the shelves must be removed or moved (see paragraph adjustable shelves).
• Keep a gap between the bottom of the fridge and the bottles to allow air to flow. As in an underground
wine cellar, air circulation is important for a homogeneous temperature inside your wine fridge.
This will also reduce energy consumption.
IMPORTANT INFORMATION ABOUT THE SERVING TEMPERATURE OF WINE
Your wine fridge has been designed to allow you to set desired serving temperature of your wine. Each wine
varietal is served at a different ideal temperature.
The temperature of the cellar is adjustable from 5-20 ˚C. Unless the wine producer says recommends a
different temperature for your particular wine, champagne should be served at 7˚C, white wine should be
served at 12˚C and red wine should be served at 18˚C (see “Wine Service Temperature” recommendation
table).
Some wines can be served young (2 to 3 years), while others are much better aged (10 years and older). Each
wine peaks at a different age. Check the ideal drinking age for your wine with your wine merchant.
SETTING TYPES: Please note that depending on where your wine fridge is kept, how often the door is open,
the ambient temperate and the loading, the time taken to reach the set temperate varies. Usually, it takes
about 24 hours for the wine fridge to reach the desired temperature and indicate a stable temperature on the
digital display. The temperature displayed will change when the desired temperature is adjusted or whenever
a large number of bottles are added to the fridge.
www.lecavist.com
Bekijk gratis de handleiding van LeCavist LEK1403ZPV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LeCavist |
| Model | LEK1403ZPV |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2242 MB |
