LD Systems U508 IEM T handleiding

Niet gecategoriseerd

LD Systems

108 pagina's

PDF beschikbaar

Handleiding

EQ SETTINGS BASS EQ G: +/- 15dB Bass frequency gain from -15dB to +15dB

f: 60Hz / 80Hz / 100Hz / 200Hz Setting the bass frequency

MIDDLE EQ G: +/- 15dB Centre frequency gain from -15dB to +15dB

f: 500Hz / 1000Hz / 1500Hz /

2500Hz

Setting the centre frequency

Q: 0.50 / 0.75 / 1.00 / 1.25 Setting the Q-factor

TREBLE EQ G: +/- 15dB Treble frequency gain from -15dB to +15dB

f: 10.0kHz / 12.5kHz / 15.0kHz

/ 17.5kHz

Setting the treble frequency

EXIT EQ

SETT.

Exit equalizer menu (press encoder)

EXIT AUDIO SETT. Exit sub-menu (press encoder)

INDIVIDUAL USERNAME (NAME)

Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select NAME (highlighted) and press the

encoder to conrm. Now set the individual name (up to 8 digits) by turning the encoder to select a letter, character or number for the rst digit of

the name and conrm by pressing the encoder. This is followed by the input for the second digit and so on. Once the name is complete, press the

encoder again to conrm. Briey (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will

appear automatically.

SET THE DISPLAY BRIGHTNESS (BRIGHTNESS)

Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select BRIGHTNESS (highlighted) and press

the encoder to conrm. Select the 3-step display brightness (HIGH = high, MID = medium, LOW = low) by turning the encoder as desired and press 2x

on the encoder to conrm. Briey (!) press POWER to return directly to the main display; after about 12 seconds of inactivity the main display will

appear automatically.

LOCK OPERATING ELEMENTS (PANEL LOCK)

Press the transmitter's rotary-push encoder (MENU) to enter the main menu, then turn the encoder to select PANEL LOCK (highlighted) and press the

encoder to conrm. To lock the control elements, select ON by turning the encoder and press the encoder twice to conrm. Briey (!) press POWER

to return directly to the main display; after about 10 seconds of inactivity the main display will appear automatically. If one of the POWER controls or

the MENU rotary-push encoder is pressed, "PANEL LOCK ON" briey appears on the display and setting changes are blocked. To unlock the controls,

press and hold the rotary-push encoder for about 2 seconds and select OFF in the PANEL LOCK menu item to permanently allow operation using the

controls.

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

Bekijk gratis de handleiding van LD Systems U508 IEM T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.