LD Systems MAUI 11 G3 MIX handleiding
Handleiding
Je bekijkt pagina 27 van 74
OPERATION
LD MAUI G3 MIX SERIES 27
7.2 NAVIGATING THE DEVICE
7.2.1 NAVIGATING THE DISPLAY
If you're not using the MAUI® G3 MIX app, use the display rotary-push encoders (RPE) to access the menu
items. Find the procedure to adjust the PREAMP gain and to set the LOWCUT to 100Hz below as an example. The
following applies to all settings:
• The menu follows a three-section structure. Each display RPE controls one of these sections. All other dis-
play pages follow the same structure.
• Push the RPE to switch back and forth between the menu items.
• Turn the RPE to adjust the values of the highlighted menu items.
STEREO LOWCUT
POLARITY PAN
NORMAL
-35.6 dB ON 30Hz
PREAMP
GAIN
PHANTOM
OFF -15.0dB
CH 1/2
1
2
3
1 Push the channel RPE of channel 1.
ð The display shows the channel strip of channel 1.
2 Push the PAGE button until the PREAMP page shows up.
3 Adjust the PREAMP gain:
a) Push the upper display RPE to select GAIN.
b) Turn the upper display RPE clockwise to increase the gain and anticlockwise to decrease it.
ð You adjusted the PREAMP gain.
4 Set the LOWCUT to 100Hz:
a) Push the lower display RPE to select LOWCUT.
b) Turn the lower display RPE to 100Hz.
ð You set the LOWCUT to 100Hz.
Bekijk gratis de handleiding van LD Systems MAUI 11 G3 MIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | MAUI 11 G3 MIX |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6624 MB |
