LD Systems ICOA PRO 12 A handleiding
Handleiding
Je bekijkt pagina 15 van 87
SAFETY
LD ICOA® PRO SERIES 15
l
Do not use the device above 2000m of altitude.
l
Unless otherwise stated, do not use under marine conditions.
l
Use only accessories specified by the manufacturer.
l
Maintenance and repairs may only be carried out by authorized service personnel.
l
Store and transport the device in a dry and safe environment.
l
Clean the device on a regular basis. See the user manual for maintenance intervals.
l
If the device was exposed to strong temperature changes, such as during transport, do not switch it on im-
mediately. Wait until the device has reached ambient temperature.
l
High sound pressure levels may cause hearing damage. Avoid prolonged exposure to high sound pressure
levels. Wear hearing protection.
l
Risk of hearing damage. Plugging or unplugging devices in the signal chain may cause an audio signal peak.
Switch on the loudspeaker as the last device in the signal chain.
l
Risk of hearing damage. Switching on or off other devices in the signal chain may cause an audio signal peak.
Switch on the loudspeaker as the last device in the signal chain.
4.5 ELECTRICAL SAFETY
l
This device is a Class I electrical device. Make sure that the protective conductor is connected to electrical
earth. Do not disconnect or bypass the protective conductor.
l
Do not bypass the mains fuse.
l
Use only mains fuses as specified by the manufacturer.
l
Do not use kinked or otherwise damaged power cables.
l
Only operate the device on compliant, tested and intact mains power outlets.
l
Do not use the device in the vicinity of water. Keep the device away from splashing or dripping water.
l
Make sure that the voltage and frequency of the mains power match the values specified by the manufac-
turer.
l
Take suitable measures against overvoltage, such as lightning strikes.
l
For devices with a power out connector, make sure the total current consumption of all connected devices
does not exceed the value specified by the manufacturer.
l
This device is not suitable for continuous current.
l
Disconnect the device from all poles before maintenance, repair or extend periods of non-use.
l
Permanently connected power cables may only be replaced by a qualified service technician.
4.6 PHYSICAL SAFETY
l
Make sure that the device and its stand are securely positioned. Secure against unintentional movement.
l
Check all cable routes to prevent tripping accidents.
l
Moving components, such as mounting brackets, pose a risk of pinching injuries.
Bekijk gratis de handleiding van LD Systems ICOA PRO 12 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ICOA PRO 12 A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12963 MB |
