LD Systems HPA 2 handleiding
Handleiding
Je bekijkt pagina 8 van 86
8
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
Included in the product packaging are:
• 1 x HPA2 headphone amplifier
• 1 x power supply unit
• 1 set of terminal blocks
• 1 mounting set for on-table or under-table mounting
• 1 set of rubber feet (pre-assembled)
• User manual
INTRODUCTION
Part of the TICA® series, the HPA 2 is a two-channel headphone amplifier designed to make monitoring
flexible and easy.
The two stereo line inputs have independent gain control. Connect using standard ¼" (6.35 mm) TRS
jacks or terminal block connections.
The HPA 2 comes with two headphone outputs and two line outputs using ¼" (6.35 mm) TRS jacks and
two 3.5 mm headphone outputs connected in parallel to these. Daisy chain multiple units together for
group listening environments. Input signal and clip LEDs help you keep everything in check.
The configuration switches let two people listen to the same stereo signal with independent volume
control, or listen to independent mono signals per headphone channel, acting as two independent
headphone amplifiers. Further options let you configure the volume knobs for individual headphone
volume control or configure one knob for global headphone volume control and the other as a separate
monitor output level control.
The HPA 2 works with high impedance headphones and very low impedances down to 16 Ohms.
Its capacitor-free output stage means that the frequency response is not affected no matter what
type of headphones you use – low or high impedance.
Its tiny (106 x 53 x 225 mm) form factor and included mounting plates allow it to be installed discreetly.
Alternatively, it fits into ¼ 19 inch rack. Use the optional rack tray to slot up to four TICA® series products
alongside each other and build a system to your exact requirements, using minimal rack space.
A great monitoring solution for audio professionals.
FEATURES
• Two channel headphone amplifier
• Two balanced line inputs with independent gain controls
• Two balanced line level outputs
• Signal and clip LEDs on each channel
• Suitable for both low and high impedance headphones
• External 100 – 240V power supply
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
Bekijk gratis de handleiding van LD Systems HPA 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | HPA 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7590 MB |
