LD Systems DIO 04 handleiding
Handleiding
Je bekijkt pagina 16 van 94
16
TECHNICAL DATA
Item number LDDIO04
Product type 0x4 I/O Dante Interface
Inputs 0
Input type Switchable balanced mic or line level
Line outputs 4
Output type Balanced line level with auto mute relay on loss of Dante/AES67 signal
Cooling Convection
Analogue Line Output
Number of output connectors 4
Connection type 3-pin terminal block, Pitch 3.81 mm
Max. Output Level 18 dBu
Interm. Distortion SMPTE < 0.005 % (-20 dBFS to 0 dBFS)
THD + Noise < 0.002% (10 dBu, 20 kHz BW)
Idle Noise Better than -92dBu
Dynamic Range > 107 dB (0 dBFS, AES 17, CCIR-2k Weighting)
Frequency response 15 Hz – 20 kHz (-0.5 dB)
Dante® Specications
Audio Channels 4 outputs
Bit depth 24 bit
Sample Rate 48 kHz
Latency Minimum 1ms
Dante Connector 100 BASE-T RJ45
Power over Ethernet (PoE) Specications
Minimum PoE Requirements PoE+ IEEE 802.3at
PSE+Data Capable of powering 1 extra PD unit
Power Input Requirements
Input Voltage 24 V DC
Minimum Current 1.5 A
Power Input Connector Pitch 5.08 mm terminal block (2-pin)
Max power consumption 10 W
Idle power consumption 7.5 W (no signal input)
Power Consumption with
Secondary Port use
22 W
Mains Inrush Current 1.7 A @ 230 V AC
Operating Temperature 0°C – 40°C; < 85% humidity, non condensing
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
Bekijk gratis de handleiding van LD Systems DIO 04, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | DIO 04 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8049 MB |
