LD Systems ANNY 10 BPH2 B5.1 handleiding
Handleiding
Je bekijkt pagina 24 van 208
24
BODYPACK TRANSMITTER
4
5
2 3 1
5
6
4
1
ON / STANDBY / OFF
Switch for switching the pocket transmitter on or off (ON = transmitter switched on, OFF = transmitter
switched off). In the STANDBY position, the transmitter is in operation but the audio signal is muted.
2
INPUT
3-pin mini-XLR jack for connecting a headset or lavalier or instrument microphone and a guitar cable.
3
MIC / 0dB / -10dB
Adjust the input sensitivity. Set the sensitivity so that when a signal is present (speech, vocals, guitar ...)
the AF LED of the receiver lights up green. As soon as the audio signal begins to distort, reduce the
sensitivity by setting the 3-step switch MIC / 0dB / -10dB to the next lower value.
Examples: Headset = MIC, guitar with passive pickup = 0dB, guitar with active pickup = -10dB.
4
STATUS LED
If the charging status of the inserted batteries is sufficient, the LED lights up green when the transmitter
is switched on. If the LED lights up red, the charging status is low. Replace the used batteries immediately.
5
ANTENNA
Antenna of the bodypack transmitter. For optimum reception, do not cover or bend.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
Bekijk gratis de handleiding van LD Systems ANNY 10 BPH2 B5.1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ANNY 10 BPH2 B5.1 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 16786 MB |
