LD Systems ANNY 10 BPH2 B5.1 handleiding
Handleiding
Je bekijkt pagina 20 van 208
20
AUDIO (Change value or status = turn encoder, confirm value or status change = press encoder)
MAIN MENU Back to main menu
PRESET Speaker preset selection MUSIC
VOCAL
LIVE
ECO
OFF
HIGH EQ Adjust treble frequencies from -12dB to +12dB
MID EQ Adjust mid frequencies from -12dB to +12dB
LOW EQ Adjust bass frequencies from -12dB to +12dB
DELAY Time delay of the sum signal in 0.5 m steps up to 10 m,
e.g. for a delay line (0 m = OFF, display in metres and feet).
PRIORITY Priority circuit for the inputs INPUT 1, 2 or 5/6. If an input is assigned priority
and a signal is present at it, the volume of the other inputs is automatically
reduced. If the signal is no longer present, the volume of the other channels
is raised again to the original value after a few seconds (no multiple selection
possible, OFF = function deactivated).
INPUT 1
INPUT 2
INPUT 5/6
OFF
EFFECT SETTINGS (EFFECT)
Press the rotary-push encoder to enter the main menu and then select the menu item EFFECT by
turning the encoder (dark background). Press the encoder again to enter the submenu and select the
desired submenu item by turning the encoder. Confirm by pressing the encoder. Refer to the following
table for information on the submenu items. Select •MAIN MENU in the submenu and press the encoder
to return to the main menu, select •HOME in the main menu, confirm by pressing the encoder, and then
return to the main display. After about 10 seconds of inactivity, the main display is automatically shown.
EFFECT (Change value or status = turn encoder, confirm value or status change = press encoder)
FX TYPE Selecting the effect type or
switching off the effect (OFF)
SMALL REVERB
LARGE REVERB
PLATE REVERB
DELAY
OFF
FX SENDS Setting the effect sends for
inputs INPUT 1, 2 and 5/6
INPUT 1 0 – 100%
INPUT 2 0 – 100%
INPUT 5/6 0 – 100%
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
Bekijk gratis de handleiding van LD Systems ANNY 10 BPH2 B5.1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ANNY 10 BPH2 B5.1 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 16786 MB |
