LD Systems ANNY 10 BPH B4.7 handleiding
Handleiding
Je bekijkt pagina 21 van 208
21
SYSTEM SETTINGS (SETTINGS)
Press the rotary-push encoder to enter the main menu and then select the SETTINGS menu item by
turning the encoder (dark background). Press the encoder again to enter the submenu and select the
desired submenu item by turning the encoder. Confirm by pressing the encoder. Refer to the following
table for information on the submenu items. Select •MAIN MENU in the submenu and press the encoder
to return to the main menu, select •HOME in the main menu, confirm by pressing the encoder, and then
return to the main display. After about 10 seconds of inactivity, the main display is automatically shown.
SETTINGS (Change value or status = turn encoder, confirm value or status change = press encoder)
LCD DIM Display illumination is switched off after approx. 10s without input ON
Display illumination permanently switched on OFF
BRIGHTNESS Adjust the display brightness from 0 – 100% 0 – 100%
CONTRAST Adjust the contrast from 0 – 100% 0 – 100%
INFO Display of the model name and the unit software version MODEL: ANNY 10
SOFTWARE: 1.x
FACTORY DEFAULT Reset to factory default settings: RESET -> SURE? -> YES
Cancel procedure: 1. CANCEL
2. RESET -> SURE? -> CANCEL
RECEIVER MODULE
3
6
5 4
1
8
2
7
1
VOLUME
Turn the control clockwise over the detent to switch the receiver on, another clockwise turn raises the
volume, counterclockwise turn lowers it. Turn the control counterclockwise over the detent to switch
off the receiver.
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
Bekijk gratis de handleiding van LD Systems ANNY 10 BPH B4.7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ANNY 10 BPH B4.7 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 16786 MB |
