LD Systems ADA 8 K4 handleiding
Handleiding
Je bekijkt pagina 10 van 126
10
SNAPSHOTS
Snapshots are full amplifier configurations that can be saved onboard of the device, and later recalled
when necessary. In the Snapshots page, it is possible to load up to 50 different amplifier configurations
that have been previously saved onboard using ArmoníaPlus. To load a new snapshot to the amplifier,
scroll through the list, select one of the snapshots available, and click the ‘Load’ button at the bottom
of the screen.
OUT CONFIG
The Out Config page allows quickly bridging the amplifier’s outputs 1 and 2, and/or outputs 3 and 4.
Simply click the ‘Bridge’ button to perform the operation, and ‘Unbridge’ to revert to the default
configuration.
When n-way loudspeaker presets have been load to n-speaker channels, a new button labelled ‘Split’
will show up in this page. It is possible to split the ways for individual configuration and control by
clicking this button.
SPEAKER PRESET
From the Speaker Preset page, it is possible to load different loudspeaker presets to the amplifier’s
outputs. To load a new preset, click the gear icon , and scroll through the different families, models,
and speaker applications. If the preset has been successfully loaded to the output channel, its name
will show in the Speaker Preset page.
NET CONFIG
The Net Config page displays the settings for the amplifier control and Dante network configurations.
To scroll between the amplifier and Dante settings, use the arrows . Clicking the gear icon , in one
of the two pages, opens the IP configurations, from where it is possible to set the amplifier or the Dante
network to Auto (default) or Static IP, and reset the network configurations to the default settings.
Dante options are applicable only to 8K4 and 12K4 models.
NODE INFO
The Node Info page displays general amplifier information, such as its serial number, operating
temperature and mains voltage, firmware versions, and ethercon ports configuration.
From this page it is also possible to access some additional amplifier settings by clicking the gear icon .
These settings are as follows:
• Lock LCD – allows the user to set a password and subsequently locks the front panel display.
When trying to perform any operation, the user will be requested to insert the password to unlock the
screen.
• Remove Groups – removes the amplifier from all EQ groups that have been prev ously created using
ArmoníaPlus. Group EQ settings will be lost under this operation.
• Factory Default – sets the amplifier to the factory default settings.
Snapshots saved onboard are not deleted.
• LCD Brightness – adjusts the brightness of the front panel display.
• Auto Fade – allows different screen on/off options, where ‘Always On’ never turns the screen off,
‘Auto Fade’ causes the screen to operate at lower brightness after 30s of not being used, and
‘Auto Off’ causes the screen to automatically turn off after 30s of not being used. A simple touch to
the screen brings it back to its normal operation status.
ITALIANO
POLSKI
ESPAÑOL
FRANÇAIS
DEUTSCHENGLISH
Bekijk gratis de handleiding van LD Systems ADA 8 K4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ADA 8 K4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12620 MB |
