LD Systems ADA 12 K4 handleiding
Handleiding
Je bekijkt pagina 9 van 126
9
FRONT PANEL CONTROLS
The front panel comprises a multitouch capacitive display
1
, a rotary encoder with pushbutton
3
,
a power status LED
4
, and a ‘Back/ArmoníaPlus Callback pushbutton
5
.
Users can select what parameters to control and navigate through the different display options and
pages available, by touching the screen, rotating and pushing the rotary encoder, or pushing the
‘Back’ button. Control of some specific parameters, such as output level and delay, are only possible by
rotating the encoder.
From the main menu
2
, it is possible to access all the different pages from where control operations
can be performed.
1
2
3
4
5
HOME
The Home page displays the amplifier’s output channels, their level, and the speaker presets assigned
to them. From this page, it is also possible to mute/unmute the outputs by clicking the respective
loudspeaker icons .
LEVEL & DELAY
The Level and Delay pages allow the control of the amplifier output levels and delay times. Once in one
of the two pages, click on any given output and adjust the level or delay by turning the rotary encoder.
When an output is selected, the white LED behind the encoder will light up, indicating that the
parameter can be altered.
Note that it is possible to select multiple outputs at the same time and simultaneously control their
relative levels and delay. Selected outputs will display a check mark next to the speaker preset name.
Clicking the ‘Set Step Size’ button on the top of the display, allows the selection of the change steps to
be applied when rotating the encoder, if finer adjustments are necessary. Level change steps can be
set from 1dB (default) to 0.1dB, while delay steps can be from 10ms to 0.1ms (default is 1ms). For the
delay controls, it is also possible to select between metric (m) or imperial (ft) systems.
MATRIX
The ADA amplifier series has an internal 4 x 4 mixing matrix. The Matrix page shows the internal matrix
outputs and the matrix inputs that are routed to them. It is possible to change the routing by clicking
on one of the ‘INPUT’ labels and selecting a new input from the list. These can be any of the four matrix
inputs, or a mix of input channels 1 + 2, or channels 3 + 4. Other routing and mixing configurations can
be achieved from ArmoníaPlus. In such cases, the ADA will display ‘CUSTOM’ in the input label.
SOURCE SELECT
The Source page shows what amplifier input sources are active in each of the 4 internal matrix inputs.
These sources can be any of the 4 amplifier analogue inputs, AES3, or Dante inputs. Manual selection of
different sources, as well as configuration of an automatic backup selection based on signal presence,
can be achieved from ArmoníaPlus.
DEUTSCHFRANÇAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
Bekijk gratis de handleiding van LD Systems ADA 12 K4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LD Systems |
| Model | ADA 12 K4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12620 MB |
