Lavor Kolumbo handleiding
Handleiding
Je bekijkt pagina 18 van 92
replacing spare parts
• XJ WARNING: If an extension cord is used,
the plug and socket must be of watertight
construction.
•WARNING: It is absolutely forbidden to
use the machine in potentially explosive
environments or areas.
• WARNING:
- NEVER EVER TOUCH THE MACHINE WITH
WET HANDS OR BARE FEET.
- NEVER PULL THE POWER SUPPLY CABLE OR
MACHINE IN ORDER TO DISCONNECT THE
PLUG FROM THE SOCKET.
- IF DURING FUNCTIONING THE POWER
SUPPLY RUNS OUT, FOR SAFETY REASONS,
TURN THE MACHINE OFF.
• K1 All the maintenance and adjustment
activities described in this handbook must
be carried out only after stopping the ma-
chine (main switch turned to o) and discon-
necting the power cord, if not clearly indica-
ted that the operation must be carried out
when the machine is on.
• K2 All the adjustment and activities that
are not described in this handbook must be
carried out by qualied and skilled operators
to avoid any accident or damage to the ma-
chine and to the operator.
• K3 Carefully read this operating handbook
before use.
It provides important information about a
safe installation, use and maintenance of the
machine.
• K4 The non-compliance with the safety
measures may entail serious injuries to the
operator and damages to the machine.
• K5 Carefully keep this handbook for con-
sultation purposes up to the machine nal
dismantling. The use and maintenance ac-
tivities must be carried out correctly; other-
wise, the builder cannot be held responsible
for the damages to people, animals or things
deriving from the non-compliance with the
following instructions.
• K6 Check that both the machine and its
components are undamaged when unpa-
cking them. Contact your reseller in case of
doubts.
• K7 Make sure that the rating correspon-
ds to the factory power line before energi-
sing the machine.
• K8 De-energise the machine before any
cleaning or maintenance activity.
• K9 Never leave the machine energised if
unused. Turn the main switch o.
• K10De-energise the machine in case of fai-
lure and / or troubles. Do not tamper with
its controls and equipment. Just contact the
authorised after-sales service points for ser-
vicing purposes and always order original
spare parts.
• K11 The draining and loading pipes, the
safety sheaths and the solenoid valves must
not be cut and tampered with. De-energise
the machine in case of damages
• K12 Any use of the machine other than
the one it has been built for represents an
anomalous condition and can cause serious
damages to the operating means and entail
a serious risk for the operator using it.
• K13 Never remove or hide the warning la-
bels applied to the machine.
• K14 The same instructions are valid for
various models; some details may dier ac-
cording to the machine model.
• K15 Never touch or start the machine
with wet hands or bare feet;
• K16 Remove the casings and the doors of
the electric boards only once the machine
has been stopped and de-energised;
For re-prevention purposes:
• K18 Keep all inammable or combustible
products away from the equipment area.
• K19 Obviously, the above-mentioned
instructions are not sucient to prevent all
sorts of accidents; therefore, the user will
have to be cautious.
• K20 The machine must not be modied or
changed in any way without the builder’s
written authorisation.
• WARNING: We recommend the use of de-
mineralized water.
• WARNING: Never use the power cable or
the gun cable to move it.
> SAFETY DEVICE
• WARNING: the gun is tted with a safety
catch. Whenever use of the machine is
interrupted it is important to operate the
safety catch to prevent accidental activation
of the jet.
EN
18
Bekijk gratis de handleiding van Lavor Kolumbo, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lavor |
| Model | Kolumbo |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 12609 MB |
