Lavor FOAMJET handleiding

Handleiding

1234567891011121314151617181920212223242526/ 26

Afdrukken

Je bekijkt pagina 11 van 26

11

WARNINGS

- THE TANK CAN ONLY BE OPENED (CAP – fig. 10) AND SERVICED AFTER ENSURING THERE

IS ABSOLUTELY NO PRESSURE INSIDE THE TANK, THEREFORE THE NEEDLE OF

THE

GAUGE (fig.16) MUST INDICATE “0” bar (tank depressurised). OPEN THE SLIDER TAP (fig. 6) TO

RELEASE ALL THE PRESSURE FROM INSIDE THE TANK.

- DO NOT FACE THE FILLING CAP WHILE UNSCREWING IT.

- THIS CAP HAS A SAFETY HOLE THAT RELEASES PRESSURE, THEREFORE IF ANY AIR

SHOULD BE RELEASED FROM THIS HOLE WHILE OPENING THE CAP, DO NOT UNSCREW IT

ANY FURTHER BUT WAIT FOR THE PRESSURE TO BE RELEASED.

- THE LOAD OF COMPRESSED AIR MUST NEVER EXCEED 8 BAR.

- THE FOAM SPRAYER MUST ONLY BE USED BY QUALIFIED ADULT PERSONNEL (after having

thoroughly read the enclosed instructions).

- OPERATORS MUST USE SUITABLE PROTECTION GEAR (mask, goggles, gloves) WHEN

USING THE FOAM SPRAYER.

- DO NOT USE THE FOAM SPRAYER TO CLEAN ANIMALS, ELECTRIC MOTORS OR HOT

SURFACES.

- THE FOAM SPRAYERS ARE DESIGNED AND MANUFACTURED TO DISPENSE WATER

OR DETERGENT SOLUTIONS.

- THE FOAM SPRAYER MUST BE CARRIED AROUND USING ITS HANDLE (fig.8).

- THE FOAM SPRAYER MUST BE SERVICED BY QUALIFIED PERSONNEL.

- AFTER USE, TO AVOID TRIGGERING CORROSION, EMPTY THE TANK COMPLETELY,

WASH WITH POTABLE WATER AND TURN IT UPSIDE DOWN TO FAVOUR DRYING.

- ON A PERIODIC BASIS CHECK THE FULL OPERATING EFFICIENCY OF THE FOAM SPRAYER,

ESPECIALLY THE GAUGE AND THE SAFETY VALVE AND REPLACE IF NECESSARY.

- IT IS STRICTLY PROHIBITED TO WELD ANY ELEMENTS TO THE TANK WITH

ANY WELDING MEANS WHATSOEVER.

- THE TANK IS NOT DESIGNED OR MANUFACTURED TO WITHSTAND IMPACT

AND COLLISION, IF NOT THAT INVOLVED IN ITS NORMAL USE AND THEREFORE

MUST BE AVOIDED. IF, DURING THE LIFE OF THE EQUIPMENT, YOU SHOULD

NOTICE ANY DEFORMATION IN THE METAL IN CRITICAL POINTS, DUE TO IMPACT

OR SIMILAR, THE TANK MUST BE REPLACED.

- ONLY USE THE TANK WITHIN THE PRESSURE AND TEMPERATURE LIMITS INDICATED ON

THE NAMEPLATE ON THE TANK AND ON THE CERTIFICATE OF CONFORMITY.

- THE MANUFACTURER DECLINES ALL LIABILITIES RELATIVE TO THE TAMPERING OF

THE EQUIPMENT ON BEHALF OF OTHERS.

(EN)

1234567891011121314151617181920212223242526/ 26

Bekijk gratis de handleiding van Lavor FOAMJET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd