Lavor DTV100 1-30 SL handleiding
Handleiding
Je bekijkt pagina 22 van 59

22
Check, clean accessories. Clean lter.
Dust comes out during the vacuuming. ►Filter has not been fastened correctly or is defective. ►Check to
see if lter is sitting properly; replace if required.
8. TECHNICAL DATAS
8.1. TECHNICAL DATA PLATE
Every machine carries a registration plate showing essential details that are necessary when contacting the
supplier/manufacturer for advice, suggestions or information on spare parts. The following details are in
-
cluded on the plate:
• Manufacturer
• Model
• Serial Number
• Supply voltage
• Installed rated power
• CE symbol (built in compliance with Machin
-
ery Directive 2006/42/EEC)
• Zone Atex marking of use
The identication plate is located on the control
panel or near the power cable
(Example identication plate)
8.2. TESTING
All machines are tested before packaging and delivery in order to ensure the correct function of each com
-
ponent. An accurate electrical safety test is carried out in compliance with specic electric safety standards
related to:
• Ground continuity test
• Insulation resistance test between every phase and the ground
• Dielectric test
• Measurement of dispersed current
• Measurement of power and absorbed current (acceptable dierence of +/-10% of rated value)
• Measurement of maximum depression and air exhaust values (tolerance of +/-15% based on temperature
values and humidity of environment)
• Measurement of maximum air absorption
8.3. SAFETY DEVICE
The vacuum cleaner has been manufactured in compliance with all legal standards for the operator’s safety.
• All metal components are grounded to eliminate shock or electrostatic discharge, including the exible
suction hose that is properly grounded. Also in this regard the choice of a suitable exible suction hose
allows to eliminate this risk on the hose length that goes from the use area to the vacuum cleaner.
• The brakes mounted on the pivoting front wheels safely secure the machine in the place of use \where
there may be a risk of movement due to uneven surfaces or other particular working conditions.
Bekijk gratis de handleiding van Lavor DTV100 1-30 SL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Lavor |
Model | DTV100 1-30 SL |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 9195 MB |