Lavex 842CD123ST12 handleiding
Handleiding
Je bekijkt pagina 5 van 12
(20) Lavex 12-Gallon, 500 PSI Carpet Extractor Lavex 12-Gallon, 500 PSI Carpet Extractor (5)
14.0 Machine Parts List – Heated Unit
Drawing No. Item ID Item Description Qty.
1 SN-12-ST-LAVEX BLUE 12-Gallon Solution Tank - Lavex Blue 1.00
2 80-0017 Part of the Bulkhead Fitting 1.00
3 80-0017 Part of the Bulkhead Fitting 1.00
4 10-0846 1/4” MPT Hex Nipple 1.00
5 10-0845 1/4” Strainer 2.00
6 80-0011 90 Degree Street Elbow 1.00
7 80-0016-REG 500 psi Regulator 1.00
8 80-0026 3/8 Barb x 1/4 MPT 90 Degree 3.00
9 10-0826 3/4” Hose Clamp 5.00
10 80-0001 Extractor Exhaust Hose 0.40
11 80-0003-A 1-1/2” Black Lined Gray Hose 2.00
12 10-0806 1-1/2” Grey Hose Barb Fitting 1.00
13 Bracket Part of 80-0016 Pump 1.00
14 80-0006 45 Degree Street Elbow 1.00
15 80-0011 90 Degree Street Elbow 1.00
16 10-0803-H Splashproof Heater Switch 1.00
16 10-0803 Splashproof Switch 2.00
17 80-0059 500 PSI Gauge 1.00
18 80-0013 500 PSI Switch Plate 1.00
19 Connector Part of 80-0059 Gauge 1.00
20 SN-12-L-LAVEX BLUE 12-Gallon Lid - Lavex Blue 1.00
21 80-0010 1/4” Brass Tee 2.00
22 80-0011-2 90 Degree Street Elbow 1.00
23 80-0004 1/4” x 4” Brass Nipple 1.00
24 10-0852 1/4” 90 Degree Brass Elbow 3.00
25 10-0804-A Hatch Cover Gasket 1.00
26 10-0804 Hatch Cover 1.00
27 80-0012 Float Assembly 1.00
28 10-0416-A 1-1/2” Black ABS Stand Pipe 1.30
29 80-0008 1.5 PVC Female Adapter 1.00
30 SN-12-RT-LAVEX BLUE 12-Gallon Recovery Tank - Lavex Blue 1.00
31 10-0805 Dump Valve 1.00
32 10-0849 1-1/2” ABS Fitting 1.00
33 10-0155 Hose Cu Straight 1.00
34 10-0848-B 1-1/2” 90 Degree ABS Street Elbow 3.00
35 10-0833 Motor Manifold Bolts 6.00
37 10-0811 2-Stage Extractor Motor 2.00
37 10-0810 3-Stage Extractor Motor 2.00
38 10-0838-A Complete Pigtail 2.00
39 10-0850 Strain Relief for Pigtail - Part of 10-0838-A 2.00
39 10-0851 Strain Relief Nut for Pigtail - Part of 10-0838-A 2.00
40 10-0822 Exhaust Grate 3.00
41 10-1030-S2 2-Stage Extractor Motor Gasket 2.00
41 10-1030-S3 3-Stage Extractor Motor Gasket 2.00
42 SN-12-MFLD Extractor Motor Manifold 2.00
43 10-0830 Hinge Keeper 2.00
44 10-0821 Extractor Hinge 2.00
45 10-0820 End Cap for Rod on Extractor 4.00
46 SN-12-MB-DRGRY 12-Gallon Motor Base - Dark Grey 1.00
47 10-0836 19” Axle 1.00
48 10-0807 Wheels 2.00
49 10-0834 Pump Flat Washer 18.00
Returned Material Authorization (RMA) Procedure
Please contact Lavex at 717-392-7472 prior to working on or changing out any warranty
parts, etc. for pre-approval. Please have the following ready and available:
• Serial Number and Model Number of the Machine
• Date of Purchase or End-User Date of Purchase
• Detailed Description of the Problem
• Photos of the Problem Area and Inside of the Machine
If parts or a piece of equipment is approved to be returned, an RMA will be issued. The
RMA Number needs to be written on the box with the item to be returned. There is a
25% restocking fee on any returned merchandise not under warranty or with no issues
found upon inspection.
Warranties will be issued for items with a manufacturer defect and will not apply to
normal wear-and-tear or abuse. We reserve the right to refuse warranties in cases of
abuse, including but not limited to rust, corrosion (water damage), dents, ingestion of
foreign matter, or items modied from its original design and unauthorized labor on
repairs.
If a new part or pieces of equipment has been approved under warranty, the new
item will be sent out under the RMA Number. Freight charges will be applied to any
warranty after 90 days of original purchase or any expedited shipping requests. Pumps,
motors and heaters being replaced after 90 days must be returned to Lavex at your or
your customer’s cost in order to determine manufactures defect.
Do not send parts or equipment back to Lavex without an RMA Number and approval.
No labor will be paid, nor parts cost reimbursed, that has not been previously
approved by the manufacturer. All warranty procedures must be strictly followed.
1.0 Safety Instructions
READ THIS MANUAL BEFORE OPERATING MACHINERY. KNOW THE
PROPER SET-UP, OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
This carpet extractor will aord you many years of trouble-free operating satisfaction, provided
it is given the proper care. All parts have passed rigid quality control standards throughout the
assembly process. Prior to packaging, your carpet extractor was again inspected for assurance of
awless operation.
This machine is protectively packed to prevent damage in shipment. We recommend that upon
delivery, unpack the unit and inspect it for any possible damage. Only a visual inspection will
reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered your
equipment. As a shipper, we are unable to report any claim for damage. You must originate any
claim within ve (5) days.
This manual is for your protection and information. Please read carefully since failure to follow
precautions could result in discomfort or injury.
Bekijk gratis de handleiding van Lavex 842CD123ST12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lavex |
| Model | 842CD123ST12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3724 MB |
