Laserworld CS-3000RGB handleiding
Handleiding
Je bekijkt pagina 7 van 19
Manual: CS-3000RGB | CS-6000RGB Manual: CS-3000RGB | CS-6000RGB
page 12 / 37 page 13 / 37
English English
switched o beam block safety may only be used in safe areas.
Always respect the local laws!
Press „Enter“ to change the settings. Use the „Up“ / „Down“ button to change the selection.
Conrm with „Enter“.
Orientation Setting
The „InuE“ menu controls the orientation of the projection. You can invert the projection and
ip it to match the orientation of the laser with the content.
Press „Enter“ to change the settings. A test picture is shown to represent the currently set
orientation. Use the „Up“ / „Down“ button to change the selection, and conrm the selection
with „Enter“ to change the test picture projection
Press „Exit“ to return to the settings menu.
Microphone Sensitivity Settings
The sensitivity of the built-in microphone for the control of the sound-to-light operation can
be adjusted in the „SEnS“ menu. Press „Enter“ to change the settings. Use the „Up“ / „Down“
button to change the selection.
The sensitivity can be adjusted between 1 and 100. Standard value is 50.
4.1. ILDA / COMPUTER CONTROL
The laser can be used with any laser control software that supports the ILDA control signal
via sub-d connector. Use an ILDA cable to connect the Digital Analog Converter (DAC / ILDA
interface) of the laser software to the ILDA in port at the laser.
To operate the laser in ILDA mode the „ILdA“ menu must be selected. Press „Enter“ to change
the settings.
Final statement
Laserworld products are tested and product packaging is inspected before leaving our
warehouse.
Users must to follow the local safety regulations and warnings within this manual and adhere
to any regulations within its place of use. Damages through inappropriate use will void any
liability or warranty of our products.
Due to continual product developments, please check for the latest update of this product
manual at www.laserworld.com. If you do have any further questions, then please contact
your dealer/place of purchase or use our contact section on our website.A
For service issues, please contact your dealer/place of purchase and ensure only genuine
Laserworld spare parts are used in any service repairs.
Errors and Omissions excepted and products are subject to change.
Laserworld AG
Kreuzlingerstrasse 5
8574 Lengwil
Switzerland
Registered oce:
8574 Lengwil / Switzerland
Company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
CEO: Martin Werner
VAT no. (Switzerland): 683 180
UID (Switzerland): CHE-113.954.889
VAT no. (Germany): DE 258030001
WEEE-Reg.-No. (Germany): DE 90759352
www.laserworld.com
info@laserworld.com
representative according to EMVG:
LaserAnimation Sollinger GmbH
Mühlbachweg 2
83626 Valley, Germany
Bekijk gratis de handleiding van Laserworld CS-3000RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Laserworld |
| Model | CS-3000RGB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4979 MB |
