Laserliner InspectorCamera 3DX Handleiding (92 Pagina's)

Handleiding

8

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.

Store the device in a clean and dry place.

1

2 3

3

Replacement of the camera unit

2

Camera head adjustment

0°

360°

max.

160°

The factory setting for the maximum angular position of the 3D camera head is 160° in new condition,

with a tolerance of ± 5°. To achieve this, the camera probe must be totally straight, meaning without any

unnecessary curves or bends. The maximum angular position may be reduced by normal mechanical wear

over the lifetime of the product.

The movable 3D camera head must not be subjected to heavy mechanical loads when in an

angled position. Observe the maximum angular position, minimum bending radius and maximum

traction force to prevent damage to the 3D camera head. Do not snatch or push the camera probe

with a jerky movement. The camera head must never be moved by hand when in use; always use

the control lever instead. When rolled up, the camera probe must not be moved either by hand or

by the control lever.

This warranty does not cover damage to the 3D camera head or probe

caused by incorrect handling.

!

EN

Bekijk gratis de handleiding van Laserliner InspectorCamera 3DX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.