Lantronix TN-SFP-10G-LRM handleiding
Handleiding
Je bekijkt pagina 18 van 21
Lantronix TN-SFP-10G-xx and TN-CWDM-10G-xxx User Guide
33499 Rev. E https://www.lantronix.com/ 18
transmitter supply voltage and receiver supply voltage are isolated. In that case, only
one supply is monitored. Refer to the device specification for more detail.
Mon1 (Bias)
Displays the measured TX bias current in uA. Accuracy is vendor specific but must be
better than 10 percent of the manufacturer's nominal value over specified operating
temperature and voltage.
Mon2 (TX PWR)
Displays the measured coupled TX output power in mW. Accuracy is vendor specific
but must be better than 3dB over specified operating temperature and voltage. Data is
assumed to be based on measurement of a laser monitor photodiode current. Data is
not valid when the transmitter is disabled.
Mon3 (RX PWR)
Displays the measured received optical power in mW. Absolute accuracy is dependent
upon the exact optical wavelength. For the vendor specified wavelength, accuracy
should be better than 3dB over specified temperature and voltage. This accuracy
should be maintained for input power levels up to the lesser of maximum transmitted
or maximum received optical power per the appropriate standard. It should be
maintained down to the minimum transmitted power minus cable plant loss (insertion
loss or passive loss) per the appropriate standard. Absolute accuracy beyond this
minimum required received input optical power range is vendor specific.
Bekijk gratis de handleiding van Lantronix TN-SFP-10G-LRM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | TN-SFP-10G-LRM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4297 MB |
