Lantronix ION C3110 handleiding

62 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 62
Lantronix ION C3110 User Guide
33417 Rev. B https://www.lantronix.com Page 5 of 62
Section 1: Introduction
The purpose of this manual is to provide information necessary to install, configure, and use the ION
C3110 from Lantronix.
Product Overview
The ION C3110 provides an interface between 1000Base-T ports and 1000Base-SX/LX ports allowing
users to integrate fiber optic cabling into 1000Base-T copper environments.
Model Numbers
SKU
Description
C3110-1013
1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (SC)
[62.5/125 μm fiber: 220 m/722 ft.] [50/125 μm fiber: 550 m/1804 ft.]
Link Budget: 8.5 dB
C3110-1039
1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (LC)
via SFP [62.5/125 μm fiber: 220 m/722 ft.] Link Budget: 8.0 dB
[50/125 μm fiber: 550 m/1804 ft.] Link Budget: 8.0 dB
C3110-1014
1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm single mode
(SC) [10 km/6.2 mi.] Link Budget: 10.5 dB
C3110-1040
1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-X SFP Slot (empty)
*Typical maximum cable distances. Actual distance is dependent upon the physical characteristics of the
network installation.
DMI Model (C3110-1040)
The Diagnostic Monitoring Interface (DMI) model allows diagnosing problems within the network. DMI
devices have four functions: 1) Transmit power, 2) Receive power, 3) Transmit bias current, and 4)
Temperature. Within each function, the device will send a trap; i.e., error whenever a high or low
warning event, or high or low alarm event occurs (for a total of 16 traps). In addition, if both the local
and remote devices are DMI models, the device will distinguish whether the trap event is from a local or
a remote device.
DMI Supported SFPs
Sold separately, the DMI supported SFP transceiver modules for port two are compatible with the
C3110-1040 devices and are available from Lantronix. Third-party Multi-Source Agreement (MSA)
compliant Small Form Factor Pluggables (SFPs) can also be used in the C3110-1040. See the Lantronix
SFP product page for SFP details.

Bekijk gratis de handleiding van Lantronix ION C3110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLantronix
ModelION C3110
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10528 MB