Lantronix ION C2210 handleiding
Handleiding
Je bekijkt pagina 11 van 17
Lantronix ION C2210 Installation Guide
33416 Rev. C https://www.lantronix.com Page 11 of 17
Install the Fiber Cable
1. Locate or build IEEE 803.2™ compliant 100Base-FX fiber cable with male, two-stranded TX to RX connectors
installed at both ends.
2. Connect the fiber cables to the C2210 SIC as described:
• Connect the male TX cable connector to the female TX connector.
• Connect the male RX cable connector to the female RX connector.
3. Connect the fiber cables to the other device (SIC, hub, etc.) as described:
• Connect the male TX cable connector to the female RX connector.
• Connect the male RX cable connector to the female TX connector.
Operation
Status LEDs
Use the status LEDs to monitor the SIC and the network connections.
FD (Fiber Duplex)
ON = Full duplex fiber connection.
OFF = Half duplex fiber connection.
LACT (Fiber Link)
ON = Fiber link connection.
Blink = Fiber network activity
PWR (Power)
ON = Power applied to chassis card
TP LED 1 (Twisted-Pair Speed)
ON Green = 100 Mb/s
ON Yellow = 10 Mb/s
TP LED 2 (Twisted Pair Duplex)
ON Green = Full duplex, blink activity
ON Yellow = Half duplex, blink activity
Bekijk gratis de handleiding van Lantronix ION C2210, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | ION C2210 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2082 MB |
