Lantronix ION C2110 handleiding
Handleiding
Je bekijkt pagina 5 van 23
Lantronix C2110 Install Guide
33415 Rev. D https://www.lantronix.com Page 5 of 23
o FEF enable/disable
o Pause enable/disable
o Auto-MDI/MDIX enable/disable
Note: Manageable Features are available when used in an ION Platform chassis along with an ION
Management Module.
Distances
Part Port 1 - Copper Port 2 - Duplex Fiber-Optic
Number 100Base-TX 100Base-FX
C2110-1011 RJ-45 100 m (328 ft) ST, 1300nm multimode, 2 km (1.2 miles) *
C2110-1013 RJ-45 100 m (328 ft) SC, 1300nm multimode, 2 km (1.2 miles) *
C2110-1014 RJ-45 100 m (328 ft) SC, 1300nm single mode, 20 km (12.4 miles) *
C2110-1019 RJ-45 100 m (328 ft) LC, 1300nm single mode, 20km (12.4 miles) *
C2110-1039 RJ-45 100 m (328 ft) LC, 1300nm multimode, 2km (1.2miles) *
C2110-1040 RJ-45 100 m (328 ft) SFP slot (empty)
* Typical max. cable distance. Actual distance depends on network installation physical characteristics.
Other transmission distances can be achieved with an open SFP converter (C2110-1040) and the
appropriate SFP module to match your required fiber type and transmission distance.
Applications
Fiber Integration in 10/100 Copper Environments: The ION C2110 device provides an interface
between 100Base-TX ports and 100Base-FX ports allowing users to integrate fiber optic cabling into
100Base-TX copper environments.
Bekijk gratis de handleiding van Lantronix ION C2110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | ION C2110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6245 MB |
