Lantronix C3220 handleiding
Handleiding
Je bekijkt pagina 11 van 42
Lantronix ION x222x / x32xx Install Guide
33433 Rev. D https://www.lantronix.com/ Page 11 of 42
IMPORTANT
The Cx2xx slide-in cards are “hot swappable” devices, and can be installed with chassis power on.
1. Locate an empty slot in the ION System chassis.
2. Grasp the edges of the card by its front panel.
3. Align the card with the upper and lower slot guides, and carefully insert the card into the
installation slot.
4. Firmly seat the card against the chassis back panel.
5. Push in and rotate clockwise the panel fastener screw to secure the card to the chassis (see
“Figure 1: Chassis Installation” on the previous page).
6. Note that the card’s Power LED lights. See “Accessing the NIDs” on page 19.
Installing the Standalone Model (S222x / S32xx)
The standalone model can be installed in any of the following ways.
• Rack mounted
• Table top
• Wall mounted
Rack Mount Installation
The S222x / S32xx standalone module can be mounted into a Lantronix E-MCR-05 media converter rack,
which can be installed on a tabletop or in a standard site rack. For installation details, see the E-MCR-05
Media Converter Rack product page.
Bekijk gratis de handleiding van Lantronix C3220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lantronix |
| Model | C3220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8951 MB |
