Landmann 16425 handleiding
Handleiding
Je bekijkt pagina 10 van 16
10
EN
■ PLEASE NOTE! Do not use any spirits or
petrol for ignition or reignition! Only use
firelighters that comply with EN 1860-3!
■ Only burn natural coniferous or decidu-
ous wood that is ready for burning (no
compressed wood products from these
types of wood).
■ The product must not be used as a waste
incinerator. No unsuitable or non-recom-
mended fuels must be used. In addition,
no liquid fuels must be used.
■ PLEASE NOTE! The product gets very
hot and must not be moved while in use!
■ Do not use the product in strong wind.
■ Keep your distance during use. If the
product has to be touched, e.g. when
adding fuel, wear barbecue gloves (to
prevent thermal risks) which conform to
DIN EN 407 (CategoryII). Even when the
fire has gone out, the surfaces will still
remain hot for some time.
■ Do not overload the product and do not
allow the fire to get too big.
■ In the event of a fire: smother the flames
with a suitable fireproof blanket or a fire
extinguisher.
Using petrol or spirit to ignite the fuel may
result in uncontrollable heat caused by def-
lagrations. You should therefore only use
safe materials for burning, such as solid
firelighters.
L
Hardwood, i.e. wood from deciduous
trees such as beech, oak or birch,
is particularly suitable as firewood.
Thanks to its high density, this wood
gives a long and even heat.
1. Stack some of the wood in the product.
Ignite one or two solid firelighters and
place them in the product.
2. Allow the solid firelighters to burn for
two to four minutes.
3. Carefully add more wood. Never throw
wood into the fire!
AFTER USE /
CLEANING AND STORAGE
PLEASE NOTE!
■ Allow all parts to cool down completely
before you clean the product, place a
cover over it or store it away.
■ Never extinguish the fire with water to
avoid burns and scalding.
■ Do not use corrosive or abrasive cleaning
agents or brushes with metal bristles.
They may damage the surfaces.
■ Do not fill with water or expose to rain-
fall for a prolonged period.
• Once all parts have cooled down,
dispose of the ash in an environmentally
friendly way.
• Clean the product with a suitable brush
or with a wet sponge and some wash-
ing-up liquid. For stubborn dirt you can
use a standard household cleaner.
• Allow all parts to dry completely or dry
them before they are stored away.
• Store them in a dry, weatherproof
location.
Bekijk gratis de handleiding van Landmann 16425, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Landmann |
| Model | 16425 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1590 MB |
