Lamax eJumper DB50 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134/ 134

Afdrukken

Je bekijkt pagina 20 van 134

14

ENCSCSCZCZCZCZCZ

TURNING

–

The correct turning technique is as follows:

1. Keep looking where you are turning.

2. Turn the handlebars in the direction of the turn.

3. Shift your body weight slightly and shift your weight to the inner footrest.

4. Tilt your upper body against the centrifugal force

SKIDDING / SLIDING

–

If unintentional skidding or sliding of the wheels occurs under braking, it can be reduced using riding tech-

niques.

MAINTENANCE

PROHIBITED!

We strongly recommend that you have your motorcycle repaired and replaced by an authorised service

centre. If you do it yourself, use only original spare parts. In case of an improperly performed service, the

customer loses the warranty provided by the manufacturer!

CHAIN TENSION ADJUSTMENT

–

Chain life can be extended by regular inspection and maintenance.

–

It is important to lubricate the chain regularly.

The chain tension can be adjusted as follows:

–

Remove the chain guard.

–

Loosen the rear wheel axle nut.

–

Loosen the rear brake calliper bolt.

–

Set the desired tension using the tensioner nuts equally on both sides.Tension the chain so that it has a sag

of approx.15 mm.

–

Tighten all loose nuts and bolts, and check wheel alignment.

–

Attach the chain guard.

BRAKE ADJUSTMENT

–

Brake pressure may need to be adjusted. The brakes can be adjusted using the extension screws on the

Bowden cable guides, or by shortening or extending the cables directly on the brakes.

BRAKE PAD ADJUSTMENT

–

If the brake pads rest against the brake disc, they must be adjusted.

–

Centre the pads by loosening/tightening the Allen screws on the brake calliper so that the gap between the

pads and the disc is the same everywhere and maintains the functionality of the brakes.

TYRE PRESSURE

–

Check tyre pressure (138 kPa / 20 PSI) and tread condition regularly.

REAR SHOCK ABSORBER ADJUSTMENT

–

The hardness of the rear shock can be adjusted to the weight of the rider. This can be done by turning the

nut on its lower part.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134/ 134

Bekijk gratis de handleiding van Lamax eJumper DB50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd