Lamax Base Kid1 handleiding
Handleiding
Je bekijkt pagina 5 van 44
- 3 - - 4 -
PAIRING PROCESS
1.
The headphones will automatically switch to pairing mode when you turn them on. The indicator light will flash
alternately red and blue.
2.
Turn on the Bluetooth function on your device (e.g. phone, music player, etc.) and start searching for available
devices.
3.
Select “LAMAX BaseKid1“ from the list of searched devices and the headphones will be paired with the device.
You may be prompted to enter a password, which is “0000“.
After successful pairing, the indicator light will flash slowly in blue.
If the headphones do not switch to pairing mode when switched on or if you need to disconnect the headphones
from the device, press and hold the + and – buttons simultaneously for 2 seconds.
CHARGING
The headphones must be fully charged before first use.
1.
Plug one end of the charging cable into the socket at the bottom of the headphones. Plug the other end into
your computer‘s USB-A port or a suitable AC adapter.
2.
The charging light will turn red to indicate that the headphones are charging.
3.
When the light turns off, the headphones are charged. Disconnect the charging cable.
Charging time is usually 2 to 3 hours.
When the charging light flashes during use, the headphones need to be charged.
During charging, the headphones and charging cable may become warm. This is a normal phenomenon.
Warning: Do not use a power adapter with fast charging support for charging.
MUSIC PLAYBACK
You can play music both when paired with a Bluetooth device and when you connect the audio cable to the AUX IN
jack. The principle of music control is the same in both ways.
Warning: Loud listening can seriously damage your hearing and even cause hearing loss.
SENSITIVITY SWITCHING
›
Bluetooth mode: after turning on the headphones, press the O button three times in short succession to switch
the sensitivity from 85 dB to 94 dB and vice versa. A short beep will sound to indicate the change in sensitivity.
›
Audio cable: after plugging in the audio cable, switch the control on the cable from 85 dB to 94 dB and vice versa.
The default sensitivity is set to 85 dB.
SPECIFICATIONS
Input voltage DC 5 V / 300 mA
Built-in battery 3.7 V / 300 mA
Distance 10 m
Bluetooth version BT v5.3
Impedance 32 Ω ± 15 %
Converter size 40 mm
Charging time 2 to 3 hours
Playback time Up to 35 hours at 50% volume
Sensitivity 85 dB/ 94 dB ± 3 dB
SAFETY PRECAUTIONS
Before first use, the consumer is obliged to familiarize himself with the principles of safe use of the product.
Security precautions
Bekijk gratis de handleiding van Lamax Base Kid1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lamax |
| Model | Base Kid1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3029 MB |
