LaCie Biggest F800 handleiding
Handleiding
Je bekijkt pagina 25 van 59
4. Setting Up Your LaCie Biggest F800
page 25
LaCie Biggest F800
User’s Manual
4.2. Creating An Array
This step will initialize the array.
1) Ensure that the RAID level is correctly set and configured.
2) On each of the individual Drive Bays, pull the Drive Bay Handle to release
the latch. Then slide each of the Drive Bays out from the LaCie Biggest F800
slightly.
3) Connect the power cable to the LaCie Biggest F800 and a grounded
electrical outlet.
4) Turn on the LaCie Biggest F800 by pressing the Power Switch.
5) Slide each of the Drive Bays back into the LaCie Biggest F800, and push
the Drive Bay Handles flat to lock the Drive Bays into place.
Once all of the Drive Bays have been closed and locked, the LaCie Biggest
F800 will check the status of the four installed disks. If all four of the disks
have not been initialized before (which will be the case for the first
connection of the LaCie Biggest F800), the RAID level initialization will begin
automatically.
1
2
Step 3
Step 3
Step 4
Step 4
Bekijk gratis de handleiding van LaCie Biggest F800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LaCie |
| Model | Biggest F800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5741 MB |
