La Pavoni CioCospritz handleiding
Handleiding
Je bekijkt pagina 13 van 30
14
You can switch the compressor on and adjust the pressure either before switching the machine on or while it is hea-
ting up.
Overload cut-out
The compressor motor is fitted with an overload cut-out that stops the compressor should the temperature exceed a
certain value (the working temperature must be between 0 and 40 °C). Should this happen, the compressor will auto-
matically start again after 15-20 minutes.
CAUTION
To ensure top efficiency of the compressor follow these recommendations:
- the compressor must be placed in a well ventilated room, protected from dust and freezing temperatures;
- the air intake and outlet vents must never be obstructed and there must be good air circulation;
- the compressor must only be used at a temperature falling between 0 and 40 °C.
10) SAFETY
There are no risks for the operator when using the CIOCOSPRITZ and the COMPRESSOR KIT.
11) TECHNICAL DA
TA
Machine
Electrical power supply: 230/240 Volt / 50 Hz (110 volt / 60 Hz upon request)
Electrical input: 250 Watt
Dimensions: 420 x 400 mm H=400 mm (without trolley)
Total weight: 20 kg
Packaging: dimensions: 520 x 500 mm H=500 mm
Weight of machine + packaging: 24 kg
Compressor kit (optional)
Electrical power supply: 230/240 Volt / 50 Hz
Working pressure: 5-7 Bar (71-100 psi)
Tank capacity: 6 l
Air suction rate: 100 l/min
rpm: 1400/min
Motor power: 600 Watt
Dimensions: 600x300 mm H=500 mm
Bekijk gratis de handleiding van La Pavoni CioCospritz, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | La Pavoni |
| Model | CioCospritz |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4399 MB |