La Germania TUS90IND60LAX handleiding
Handleiding
Je bekijkt pagina 4 van 28
4
INSTALLING THE SYSTEM TO PREVENT OVERTURNING
To prevent the appliance from accidentally overturning, the system provided must be installed. Install the system as shown in
the figures. Figures 9-10
APPLIANCE GAS CONNECTION
Before connecting the appliance to the gas network, make sure that the data on the label attached to the food warmer
drawer or on the back of the cooker are compatible with what is indicated for the gas distribution network.
A label attached to the last page of this handbook and in the food warmer drawer (or on the back) of the appliance
indicates the appliance adjustment conditions: type of gas and operating pressure.
IMPORTANT: This appliance must be installed in compliance with current national standards in force and used only in
a well-ventilated room.
WARNING: It should be recalled that the appliance utilises a threaded 1/2" gas cylindrical male fitting according to UNI-
ISO 228-1.
To connect the appliance to the gas network with a flexible rubber hose, a supplemental hose nipple fitting is needed
(see Fig. 11) which is supplied with the appliance.
ADAPTATION TO DIFFERENT TYPES OF GAS
Before performing any maintenance operation, disconnect the appliance from the gas supply and electricity network.
REPLACING THE NOZZLES TO OPERATE WITH ANOTHER TYPE OF GAS:
Follow the instructions below to change the burner nozzles on the work surface:
1) Pull out the plug from the electric outlet to avoid any type of electric contact.
2) Remove the grids from the work surface (Fig. 12).
3) Remove the burners (Fig. 12).
4) Unscrew the nozzles using a 7 mm spanner, and replace them (Fig. 13) with those needed for the new type of gas according
to what is indicated in Table 1.
Follow the instructions below to change the oven burner nozzle:
1) Remove the oven level (Fig. 14-15).
2) Loosen the screw V and pull out the burner from the support being careful not to damage the ignition plug and the
thermocouple (Fig. 16).
3) Unscrew the nozzle R (Fig. 16) using a 10 mm spanner and replace it with the nozzle needed for the new type of gas
according to what is indicated in Table 2.
Follow the instructions below to change the grill burner nozzle:
1) Loosen the screw at the end of the grill burner and pull out the burner from the support being careful not to damage the
ignition plug and the thermocouple (Fig. 17).
2) Unscrew the nozzle R (Fig. 17) using a 7 mm spanner and replace it with the nozzle needed for the new type of gas
according to what is indicated in Table 2.
WARNING: After completing the above-mentioned replacements, the technician must adjust the burners, as described
in the paragraph below, seal any adjustment and pre-adjustment devices and apply the label on the
appliance, to replace the existing one, corresponding to the new gas adjustment. This label is contained in
the spare nozzle bag.
Table 1 APPLIANCE CATEGORY: II2H3+
Burner Types of gas Pressure Nozzle
diamete
r
Rater capacity Reduced
Capacity
By-pass
Diamete
r
mba
r
1/100 mm. g/h l/h kW kcal/h kW kcal/h 1/100 mm.
Auxiliary Natural G20 20 72 - 95 1 860 0,48 413 34 reg.
Butane G30 30 50 73 - 1 860 0,48 413 34
Propane G31 37 50 71 - 1 860 0,48 413 34
Semi-rapid Natural G20 20 97 - 167 1,75 1505 0,60 516 36 reg.
Butane G30 30 65 127 - 1,75 1505 0,60 516 36
Propane G31 37 65 125 - 1,75 1505 0,60 516 36
Rapid Natural G20 20 115 - 286 3 2580 1,05 903 52 reg.
Butane G30 30 85 218 - 3 2580 1,05 903 52
Propane G31 37 85 214 - 3 2580 1,05 903 52
Ultra rapid Natural G20 20 153 - 405 4,25 3655 1,80 1548 65 reg
4 kW Butane G30 30 102 309 - 4,25 3655 1,80 1548 65
Propane G31 37 102 303 - 4,25 3655 1,80 1548 65
Natural G20 20 ext. 155
int. 70
-
-
476
5
-
4300 0,48
-
413 ext. 65 reg.
Int. 34 reg.
Ultra rapid
Dual 5 kW
Butane G30
30 ext. 96
int. 46
334 -
-
4,60 3956 0,48
-
413 ext. 65
Int. 34
Propane G31
37 ext. 96
int. 46
328 -
-
4,60 3956 0,48
-
413 ext. 65
Int. 34
Table 2 (model with gas oven and gas grill with single control, or gas oven and electric grill)
Oven Natural G20 20 155 - 429 4,50 3870 0 65 reg.
Butane G30 30 105 327 - 4,50 3870 0 65
Propane G31 37 105 321 - 4,50 3870 0 65
Grill Natural G20 20 108 - 191 2 1720 0 -
Butane G30 30 72 145 - 2 1720 0 -
Propane G31 37 72 143 - 2 1720 0 -
Bekijk gratis de handleiding van La Germania TUS90IND60LAX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | La Germania |
| Model | TUS90IND60LAX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8778 MB |
