La Germania DA2MN handleiding
Handleiding
Je bekijkt pagina 38 van 91
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next figure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Installing andremovingwireracks
To remove wire racks, press the clips shown with arrows in the figure,
first remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
ChangingThe OvenLamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of applianceand ensurethat appliance is cold.
Remove the glass protection by turning as indicated in thefigure. If you
have difficulty in turning, then using plastic gloves will help you in
turning.
Then remove the lamp by turning, install the new lamp with same
specifications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp Type E14 Lamp
Rack4
Rack3
Rack2
Rack1
220-240 V, AC
15-25 W
Figure 27
220-240 V, AC
15 W
Figure 28
38
GB
RackPositions
Bekijk gratis de handleiding van La Germania DA2MN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | La Germania |
| Model | DA2MN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9355 MB |
