La Crosse Technology LTV3-TH2-3 handleiding
Handleiding
Je bekijkt pagina 6 van 16
Cleaning Your Rain Sensor
Winter Storage Options
• Leaves, grass, or other debris may need
to be removed periodically from the funnel
of your Rain Sensor.
• Be sure to check inside your Rain Sensor
as well. Insects or dirt can begin to restrict
the movement of the Rocker.
• Unlatch the Locking Tabs on the side
of the Rain Sensor to remove the Funnel.
This will allow you to easily clean each part
separately.
• Remove batteries and store in a safe place.
• Remove batteries and cover in place.
• Leave outside, uncovered. While the Rain
Sensor cannot accurately record snowfall,
when the snow melts the water will be
counted as rain.
• The Rain Sensor is self-emptying, so water
should not freeze inside.
Rain Sensor Cleaning & Storage
RAIN
Locking Tabs
Rocker
Battery
Compartment
Funnel
• This Rain Sensor is designed for outdoor
use and will withstand temperatures below
freezing.
For Accurate Measurements
• Mount the Rain Sensor horizontally
and ensure it’s level.
• The sensor should be mounted more
than 3 feet (91.4 cm) above ground.
• Your Rain Sensor needs to be in an
open area for accurate readings.
• Ensure the base of your Rain Sensor is not in
a depression.
• This sensor has drainage holes in its base that
allow it to self-empty.
• For more info, watch our sensor mounting
video here: bit.ly/mounting_rain
Position Your Rain Sensor
RAIN
09
10
Bekijk gratis de handleiding van La Crosse Technology LTV3-TH2-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | La Crosse Technology |
| Model | LTV3-TH2-3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2540 MB |