Kuppersbusch VKE3000.0SR-FO handleiding
Handleiding
Je bekijkt pagina 19 van 28
EN
17
Use and
Maintenance
User instructions of the
Touch Control
HANDLING ELEMENTS
2
Hot plate selection touch keys.
Power and/or residual heat
displays*.
“Decrease” power touch key.
“Increase” power touch key.
Double burner selection touch key
(double hot plate).
Locking touch key for the rest of
touch keys.
Hot plate double zone indicatior
plates)*.
Lock icon*.
Timer touch key.
*Time set hot plate icon.
12
*Timer display
* Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
key, you only need to touch it with
function.
SWITCHING ON THE DEVICE
time, it will be locked and the related
touch locking touch key (7) until the
1 Touch the switching on touch key
(1) for at least one second.
The Touch Control is activated and a 0
appears with 50% brightness on all
the power displays (3).
If any zone has residual heat indication
before switch on ,the display continue
s showing ''H'' instead of 0.
10 seconds the touch control will
SWITCHING ON A HOT PLATE
Once the Touch Control has been
activated by means of the touch key
(1), the power indicators of the hot
plates will display a 0 (3).
1 Press the touch key for the selected
hot plate (2). The related power
indicator ( 3 ) will be activated
and brightness of indicator will
increase.
2 Using the touch key or (4/5),
choose the desired power level.
The and touch keys are
repetitive, so if you keep them pressed
they increase or decrease with a 0.5
second interval.
Only one hot plate can be selected at
the same time
Warning:
To operate a hot plate, it must
be selected rst. When you want to
use a hot plate,check the brightness
of the power indicator.After
choosing hot plate, brightness of
power indicator should increase.
Quick switch-on at maximum
power: Once you have selected the
hot plate, press the touch key (4)
once. The hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE
1 The hot plate must previously be
selected.
2 Using the touch key (4), lower
the power level to 0.
Quick switch-o alternatives :
sensor for 2 seconds, the related zone
ii) When you press touch keys and
(4/5) simultaneously, the hot plate
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
is in stand by),
ii) or displays 0 (if the appliance is
still running).
Warning:
In a first run, H indication may
appear in a short time on the power
display. This showing is related
with setup operation and it does
not mean the cooking zone is hot.
Warning:
H indication is used for the safety
purposes in any case. Even if the
power is cut o for a long time, after
power on, H indication appears.
SWITCHING OFF THE DEVICE
Bekijk gratis de handleiding van Kuppersbusch VKE3000.0SR-FO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kuppersbusch |
| Model | VKE3000.0SR-FO |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3192 MB |
