Kuppersbusch G6340.0v handleiding
Handleiding
Je bekijkt pagina 37 van 52
7
Water Softener
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set manually, using the water hardness dial.
The more minerals there are, the harder your water is.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise
the level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
1. Open the door, switch on the appliance.
2. Within 60 seconds after the appliance was switched on press the Program >
button for more than 5 seconds to enter the water softener setting mode.
set model within 60 seconds after the appliance was switched on.
3. Press the Program > button again to select the proper set according to your local
environment, the sets will change in the following sequence:
H3->H4->H5->H6->H1->H2->H3.
4. Without operation in 5 seconds or press the Power button to end the setup model.
dH=1.25 Clarke=1.78 fH=0.178mmol/l
°
°
°
1
The factory setting: H3
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
dH
German
dH
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
French
fH
French
fH
Mmol/lMmol/l
British
Clarke
British
Clarke
WATER HARDNESS
Salt consumption
(gram/cycle)
0
9
12
20
30
60
Regeneration occurs
every X program
sequence
No regeneration
10
5
3
2
1
Water softner
level
1)
Every cycle with a regeneration operation consumes additional 2.0 litres of water,
the energy consumption increases by 0.02 kWh and the program extents by 4
minutes.
1)
H1
H2
H3
H4
H5
H6
Bekijk gratis de handleiding van Kuppersbusch G6340.0v, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kuppersbusch |
| Model | G6340.0v |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4500 MB |
