Kuppersbusch G4800.1v handleiding
Handleiding
Je bekijkt pagina 28 van 40
28/
EN
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the L:
position on the display. Interior lighting
is off in “L:0” position and on in “L:1”
position. Select the position you want
with the Time Delay key.
3. Switch off the machine with the On/Off
key to save the changes.
Auto Door Opening
(Depends on the Model)
Thanks to the “Auto Door Opening” feature
on your machine, the drying effectiveness
of your machine is improved and power
is saved. There are two options, namely
“OFF” and “ON”.
You may use sub-menu settings to change
“Auto Door Opening” settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Auto Door Opening feature opens the
door at the end of the washing cycle
thanks to the “door opening shafts".
This process takes about 2 minutes.
Do not force to close the door if the
power is interrupted while the shafts
are moving out. Operation shall be
completed and shafts shall be retracted
when the power is restored.
Auto Door Opening function may
cause changes to the cycle time.
Changing Warning Sound Volume
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the S:
position on the display.
3. Each pressing on the Time Delay key
will change the warning sound volume
as "S:0" off, "S:1" medium and "S:2"
high.
Automatische Tür Öffnen
1. Drücken Sie nach dem Einschalten
Ihres Geräts gleichzeitig die
Verzögerungstaste und die Taste P/
P+. Halten Sie gedrückt, bis der
Countdown auf dem Bildschirm 3, 2, 1
abgeschlossen ist.
2. Drücken Sie die Taste P / P+ und
bewegen Sie sich auf die Position o:
auf dem Bildschirm. “o: Die Position
0“ zeigt an, dassdie Automatische Tür
Öffnen
Funktion ist ausgeschaltet “o: Die Position
1 ”zeigt an, dass sie eingeschaltet ist.
Wählen Sie die gewünschte Position
mit der Verzögerungstaste.
3. Schalten Sie Ihr Gerät mit der Ein/
Aus Taste aus, um die Einstellung zu
speichern.
Bekijk gratis de handleiding van Kuppersbusch G4800.1v, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kuppersbusch |
| Model | G4800.1v |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5701 MB |
