Kuppersbusch G4800.1v handleiding
Handleiding
Je bekijkt pagina 18 van 40
18/
EN
1. Open the lid of the rinse aid reservoir
with the help of the latch.
2. Fill the reservoir until “MAX” level.
3. Slightly press the point (B) of the
reservoir lid to close it.
4. If there are stains on tableware items
after washing, level must be increased
and if there is a blue trace after wiping
them by hand, it must be decreased.
This is set to position 3 as factory
default.
The rinse aid adjustment is described
under "Adjusting the amount of rinse
aid" in the section for operating the
machine.
The best washing performance in
dishwashers is obtained by using
detergent, rinse aid and water softening
salt individually.
Observe the instructions of the detergent
manufacturer on the package when using
tablet detergents.
Contact the detergent manufacturer if
your dishes are wet and/or if you notice
limescale spots particularly on your
glasses after the washing programme is
over when using a tablet detergent.
When you switch to powder detergent
from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
Rinse aid
The rinse aid used in dishwashers is a
special combination that aims to increase
drying efficiency and prevent water or
lime stains on the washed items. For
this reason, care must be paid to have
rinse aid in the rinse aid reservoir and
to use rinse aids produced specially for
dishwashers only.
Bekijk gratis de handleiding van Kuppersbusch G4800.1v, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kuppersbusch |
| Model | G4800.1v |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5701 MB |
