Kugoo KuKirin G2 Master handleiding
Handleiding
Je bekijkt pagina 10 van 46
14 15
Do not clean your e-scooter with alcohol, gasoline, kerosene or other corrosive or volatile solvents as they
may damage its exterior and interior structure. Spray via pressurized washer or hose is strictly forbidden.
Before cleaning, make sure that this e-scooter is powered off and free of charging and its charging port is
tightly sealed. Otherwise, the cleaning process may compromise its electronic elements or cause water into
its battery.
If the braking force is too tight:
Loosen the braking arm nut by wrench, slightly lengthen the
brake wire to make its tail shorter, tighten the nut, and then test
the brake to confirm the braking force.
If the braking force is weak:
Loosen the braking arm nut by wrench, slightly lengthen the
brake wire to make its tail longer, tighten the nut, and then test
the brake to confirm the braking force.
Brake calibration:
Replace the foot board grip:
Shaky bracket adjustment:
When replacing the pedal leather, just replace it by remov-
ing the rubber pad on its surface.
Daily maintenance:
Check the tire pressure regularly and maintain a proper pressure.
Make sure that both brakes are functioning properly.
Scrutinize the tightness of all screws and nuts.
Wipe this e-scooter surface with a clean cloth so as to prevent water from entering electronic elements.
Battery maintenance:
When charging this e-scooter or leaving it in idle, please turn off its power and avoid full discharge.
When leaving this e-scooter in idle for a long term, please store it in a safe place. Keep its battery capacity above
50% and charge it at least every 3 months. Avoid using and storing its battery at an extreme temperature.
Charge this e-scooter via its original charger and avoid battery damage or fire risks.
Regular overhauling:
Scooter frame, front fork and suspension: Check scooter frame, front fork and suspension components (If any)
regularly so as to ensure that there is no damage.
Monthly overhauling is recommended. Especially when it is rode frequently. Refill a small amount of white
lubricant grease or oil into its folding mechanism for maintenance for every 6 months.
Storage:
Please store the vehicle in a flat, stable, well-ventilated and dry venue.
Avoid exposing this e-scooter directly to sunlight or in other excessively humid places for a long term. Keep this
e-scooter clean.
WARNING! Please place the vehicle packaging and various components in a rational order, and keep them out of
the reach of children so as to avoid them from swallowing by mistake.
First of all, check whether the vertical tube screw is loose or
not; if it is, tighten it first and then the two folding mecha-
nism screws by hex wrench.
If this e-scooter wobbles due to multiple drops, such problem
can be improved by adjusting the above-mentioned screws.
WARNING! Please stop operating this product if it is damaged. This e-scooter will be subjected to high
stress and normal abrasion during utilization so the relevant components shall be overhauled in a timely
manner according to the Manual. Worn or damaged components or those beyond service lives must be
replaced in time so as to avoid riding risks.
EN EN
Bekijk gratis de handleiding van Kugoo KuKirin G2 Master, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kugoo |
| Model | KuKirin G2 Master |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7877 MB |
