KStrong UFS310020 handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 28
5
3. IMPORTANT INFORMATION
It is important to inspect the equipment according to the manufacturer’s instructions before each use.
Inspectionofequipmentshouldbedoneonaregularbasisbyaqualiedperson,andtheresultsmustberecordedintheinspection
log.
DO NOT REMOVE product labels which include important warnings and information for the authorized person. “Authorized Person”
is a person who is exposed to fall hazards during the course of their work. This individual requires formal training in the use of
personal fall protection equipment and systems. The term “Authorized Person” may be used interchangeably with “User” and “End-
User”.
DO NOT ALTER the equipment in any way.
Always send the equipment back to the manufacturer or to the persons or entities authorized in writing by the manufacturer for any
repairs if required.
Never use any natural material like Manila, cotton, etc. as part of a Fall Protection System.
Fall protection equipment should only be used for the purpose for which it has been designed.
This equipment should never be used for towing and hoisting or for any other purpose than its intended use.
A competent person must ensure compatibility of the system to minimize any potential of accidental disengagement.
Authorized persons or users shall be trained on all warnings and instructions provided in this manual.
It is important for all authorized persons and users to refer to the applicable ANSI Standards and to the regulations governing
occupational safety.
Take proper precautions to remove any debris, material, obstructions, etc., from the work area which could cause injury, or
otherwise interfere with the functioning of the system.
Always check for obstructions below the work area to make sure that the potential fall path is clear.
Keep the equipment away from anything that could damage it such as sharp edges, rough or abrasive surfaces, high temperature
surfaces, heat and welding sources, moving machinery, electrical hazards, etc.
It is important to keep in mind environmental hazards when selecting fall protection equipment.
Do not expose the equipment to chemicals, highly corrosive or caustic environments, or to direct sunlight and UV radiation, which
may cause UV degradation.
Such harmful environments require a more frequent inspection and servicing program of the fall protection equipment to maintain
the integrity and safety of the equipment. Contact KStrong if in doubt.
Allthesyntheticmaterialoffallprotectionequipmentmustbeprotectedfromslag,hotsparks,openamesorotherheatsources.
It is recommended that heat resistant materials are used in such applications.
It is important to allow adequate fall clearance below the work surface.
Always have a Rescue Plan ready and at hand when using this equipment.
WARNING !!
Ifafallweretooccur,thentheforcesofimpactcouldaffecttheuser.Henceitisimportanttoconsidertheage,tnesslevelandthehealth
conditionoftheuserbeforetheequipmentisputtouse.Consultaphysicianincasetheuserisnotfeelingphysicallytandhasdoubts
about their ability to safely absorb the fall arrest forces. This equipment is not meant for use by pregnant women and minors.
WARNING !!
Immediately discard any product which is exhibiting unusual wear, deformity or deterioration.
Immediately remove from service any equipment that has been subjected to a fall.
4. COMPONENT COMPATIBILITY
Component compatibility with KStrong manufactured fall protection equipment is ensured by strictly following the instructions for each
type of equipment used. However, if the user utilizes combinations of components or sub systems that are manufactured by others, then
onlya“qualied”or“competent”person(asdenedinOSHA)canensurethecompatibility.Ifsubstitutionsorreplacementsaremade
with non-approved components or sub systems then this may severely affect the compatibility of the equipment, making the complete
system unsafe for use.

Bekijk gratis de handleiding van KStrong UFS310020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKStrong
ModelUFS310020
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4927 MB