KStrong UFS310020 handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 28
23
Model- UFS314006LD
UID : XXXXXXXXXXXX
QR
Code
Model- UFS319006L
PRODUCT REF. NO. :
WIRE ROPE LENGTH : 8.5FT
UID : XXXXXXXXXXX
MONTH & YR OF MFR. : MM/YYYY
UFS319006L
QR Code
USE: INSPECTION: This device is meant to be used by a single Inspect unit in accordance with
person as a fall arrester device. The connections manufacturer's instructions and regulatory
should only be made directly to the attachment point guidelines. Before use, inspect for any signs of
of a full body Harness. Make sure that the connection damage, wear, or malfunctioning components. Check
to the anchorage is secured properly before every lifeline retraction by pulling out the entire length of the
use. Ensure that the lifeline is kept safe and does lifeline and allow it to retract under light tension;
not come in contact with sharp edges or lifeline should retract completely. Pull sharply to
abrasive surfaces, and thermal, electrical or test locking function; brakes must engage.
chemical hazards. This equipment may be used Before use, inspect the condition and functions
as a component of a Personal Fall Arrest of the lifeline, condition of fasteners, and legibility
System in Horizontal Lifeline applications. The of labels. Also check for evidence of defects,
design, installation and utilization of horizontal damage, or missing parts. Check impact indicator
lifelines must be supervised by a qualified/ for signs of activation. Inspection must be done by a
competent person. A competent person must Competent Person and recorded every 6 months.
calculate the fall clearance before each use. The fall IMMEDIATELY REMOVE FROM SERVICE IF IMPACT
clearance must include consideration for swing falls. INDICATOR ON HOOK DISPLAYS RED.
Clearance specified is based on the lifeline installed
vertically overhead and in line with workers.
COMPLIES WITH:
ANSI Z359.14-2014
& ANSI A10.32-2012
OSHA 1926 Subpart
M &OSHA 1910
SPECIFICATIONS:
Cable Material: 7/32" Galvanized steel wire rope
Average arresting force: 900 lbs.
(LE Use):
Capacity range: 130 - 310 lbs.
Min. setback distance from edge: 2ft.
Max. arresting distance: 120’’
Free fall: 6’ max.
Fall clearance: 18’
(Non-LE Use):
Capacity range: 130 - 310 lbs.
Max. arresting distance: 54”
Free fall: not permitted
Fall clearance: 7.5’
Class B SRL
Housing Material: High impact strength Polymer
Date of First Use
INSPECTION GRID
Made in India
kstrong.com
WARNING
DO NOT REPAIR OR SERVICE THIS SRL ON YOUR OWN. DO NOT REMOVE THE LABELS.
Before each use, ensure you read and understand all manufacturer's
instructions received with this equipment at the time of shipment.
Model- UFS319006LD
PRODUCT REF. NO. :
WIRE ROPE LENGTH : 8.5FT
UID : XXXXXXXXXXX
MONTH & YR OF MFR. : MM/YYYY
UFS319006LD
QR Code
USE: INSPECTION: This device is meant to be used by a single Inspect unit in accordance with
person as a fall arrester device. The connections manufacturer's instructions and regulatory
should only be made directly to the attachment point guidelines. Before use, inspect for any signs of
of a full body Harness. Make sure that the connection damage, wear, or malfunctioning components. Check
to the anchorage is secured properly before every lifeline retraction by pulling out the entire length of the
use. Ensure that the lifeline is kept safe and does lifeline and allow it to retract under light tension;
not come in contact with sharp edges or lifeline should retract completely. Pull sharply to
abrasive surfaces, and thermal, electrical or test locking function; brakes must engage.
chemical hazards. This equipment may be used Before use, inspect the condition and functions
as a component of a Personal Fall Arrest of the lifeline, condition of fasteners, and legibility
System in Horizontal Lifeline applications. The of labels. Also check for evidence of defects,
design, installation and utilization of horizontal damage, or missing parts. Check impact indicator
lifelines must be supervised by a qualified/ for signs of activation. Inspection must be done by a
competent person. A competent person must Competent Person and recorded every 6 months.
calculate the fall clearance before each use. The fall IMMEDIATELY REMOVE FROM SERVICE IF IMPACT
clearance must include consideration for swing falls. INDICATOR ON HOOK DISPLAYS RED.
Clearance specified is based on the lifeline installed
vertically overhead and in line with workers.
COMPLIES WITH:
ANSI Z359.14-2014
& ANSI A10.32-2012
OSHA 1926 Subpart
M &OSHA 1910
SPECIFICATIONS:
Cable Material: 7/32" Galvanized steel wire rope
Average arresting force: 900 lbs.
(LE Use):
Capacity range: 130 - 310 lbs.
Min. setback distance from edge: 2ft.
Max. arresting distance: 120’’
Free fall: 6’ max.
Fall clearance: 18’
(Non-LE Use):
Capacity range: 130 - 310 lbs.
Max. arresting distance: 54”
Free fall: not permitted
Fall clearance: 7.5’
Class B SRL
Housing Material: High impact strength Polymer
Date of First Use
INSPECTION GRID
Made in India
kstrong.com
WARNING
DO NOT REPAIR OR SERVICE THIS SRL ON YOUR OWN. DO NOT REMOVE THE LABELS.
Before each use, ensure you read and understand all manufacturer's
instructions received with this equipment at the time of shipment.

Bekijk gratis de handleiding van KStrong UFS310020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkKStrong
ModelUFS310020
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4927 MB