KStrong UFS310010 handleiding
Handleiding
Je bekijkt pagina 9 van 28
9
working as close to the anchorage point as possible. Swing falls will substantially increase the fall clearance required when a SRL
or other variable length connecting subsystems are used.
• Sharp edges: The lifeline of the SRL may be damaged by unprotected and sharp edges, hence they should be protected from all
edges. The KStrong Leading Edge tested SRL-LE’s are designed in such a way that they provide additional protection from falls
occurring over edges. However, protection to these SRL-LE’s should be provided from sharp edges such as sheared, cold rolled or
amecutsteel.
• Horizontal systems and Tripods: It is extremely important to ensure that the tripod or the Horizontal line system is compatible with
theSRL.Horizontalsystemsmustbedesignedandinstalledunderthesupervisionofaqualiedengineeronly.
14. PERIODIC EXAMINATION
Always keep the instructions provided with the product. Take the information from the markings on the product and enter this information in
theidenticationsheet.Itisessentialtochecktheconditionoftheequipmentandensuresafetyoftheuserthroughperiodicexaminationof
theproduct.Thisequipmentmustbeexaminedbyaqualiedpersonatleastonceeverysixmonths,strictlycomplyingwiththeinstructions
of the manufacturer. Also, record the previous check on the attached sheet. If the equipment is in heavy usage or is used in a harsh
environment, then the frequency of inspection should be increased in accordance with the regulations. Check also that the markings on
the product are legible.
15. PURPOSE AND APPLICATION
KStrong SRL’s are used to safely expand the working area, where a harness with a 6 foot lanyard is inadequate. Hence the lanyard line
extends to the required length, as per use. When the length is shortened, the line retracts into its casing, ensuring that there is no slack in
the line. More importantly, the SRL is designed to immediately arrest the fall of the user, and also to limit the shock loading on to the body of
the user. The SRL is a part of the personal fall arrest system, along with other components like full body harness and anchorage connector.
16. LIMITATION OF USE OF KSTRONG SRL’s
KStrong SRL’s are to be used as part of personal fall arrest, restraint, rescue or work positioning systems.
Full Body harnesses, connectors, hooks, lanyards, etc. are designed in such a way that they work in sync with other elements of a personal
fall arrest system. While the SRL’s are designed to arrest a fall from height they also minimize the impact load on the wearer. KStrong
recommends that only those components or sub systems of the personal fall arrest system which are manufactured by KStrong be used
incombination.Ifothermanufacturer’sequipmentareused,thentheyshouldbeensuredforcompatibilitybyaqualiedpersononly.If
substitutions or replacements are made with non-approved components of sub systems then this may severely affect the compatibility of
the equipment, making the complete system unsafe for use.
17. INSPECTION OF COMPONENTS OF PERSONAL FALL ARREST SYSTEM
It is mandatory to have a detailed visual inspection of all the harnesses, lanyards, connectors etc. prior to each use. This ensures that the
equipment is in good condition and is operating correctly. If there are any doubts regarding the safe state of product or if the product has
beenusedtoarrestafall,thenimmediatelywithdrawtheequipmentandsenditbacktothemanufacturerortothequaliedauthorized
repair center. Check on the back-shoulder straps of the harness for the fall indicators, which should be intact. If it is found to be deployed,
then the harness should be removed from use immediately. Never attempt to repair or modify a Personal Protective Equipment (PPE).
18. FORMAL INSPECTION
It is mandatory that a competent person other than the user must perform a formal inspection of Personal Fall Arrest Systems (PFAS)
and its components once at least every six months. This frequency should be altered on the basis of conditions for use or exposure. The
inspection results should be recorded in the inspection and maintenance log at the end of this manual.
19. PRE-USE INSPECTION CHECK OF THE SRL’s
Impact Indicator: Look for the Impact Indicator on the swivel hook of the SRL, at the attachment end of the line. If the band shows green
color, then proceed with further steps for inspection. If however the indicator shows a red color, then this means that the device has
arrested a fall. Remove the SRL from any further use immediately, and return the device to KStrong, or to a KStrong authorized repair
center only. If the SRL has an additional webbing shock pack, then inspect the shock pack; it should not be opened, torn or deployed.
If inspection reveals an unsafe condition, then the SRL should be immediately removed from service and destroyed, or sent to KStrong
authorized service center for repair. Follow below steps for inspecting the SRL:
Bekijk gratis de handleiding van KStrong UFS310010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KStrong |
| Model | UFS310010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
