KStrong UFS310010 handleiding
Handleiding
Je bekijkt pagina 12 van 28
12
24. SEALED RETRACTABLE FALL ARRESTER LIFELINE -
• Introduction: KARAM introduces Armor range of SRL’s specially meant for the toughest & harsh environments. The heavy duty
sealed design, corrosion resistant material used in the SRL keeps the critical working components free of dirt, grease, water &
chemicals. Best suited for OIL & GAS Industries & offshore. Sealed Design meets IP68 level of IEC 60529 for ingress protection
against Dust and water.
• Installation:
Step 1: Connect the anchorage eye at the top of the Retractable Fall Arrester to a suitable anchorage point situated above the user’s
head using karabiners as per ANSI Z359.12-2009 & ensure the Karabiner is locked.
Step 2: Now connect the swivel hook of the equipment to the attachment element of your full body harness and ensure that it is
locked. You are now safe to move up & down in normal speed. In the event of a fall, the Sealed Retractable Fall Arrester Block locks
& also minimizes the impact forces on the body of user.
25. INSTALLATION OF SRL-LE-
Connect the swivel eye of the SRL-LE to the anchor point with the help of a self-locking carabiner. The snap hook at the end of the SRL-LE
adjacent to the webbing shock pack, is connected to the dorsal D-ring of the full body harness of the user.
• How to use this equipment for lateral movement- KStrong SRL-LE can now also be used for lateral movement with 100% tie- off
assurance.
WARNING!: Ensure that the user is always connected to the anchorage point.
Connect one leg of the SRL to a pre-
checked anchorage point and secure
lock with the help of the hook.
Work on single lanyard
Park the unused, the second leg on to
the harness’s lanyard keeper. So that it
does not gets entangled while working.
For lateral movement
connect the second leg of the lanyard
successive anchorage point.
STEP 1 STEP 2
STEP 3
Ensure that both legs are connected to
successive anchorage points for lateral
movement.
Completing Lateral Movement
Now for further lateral movement along
the line, disconnect the one leg from the
rstanchoragepointandconnectitto
the successive anchorage point.
After Lateral Movement
Change the SRL’s leg for making lateral
movement between the anchor points
& this can be done with 100% tie- off
assurance.
STEP 4 STEP 5
STEP 6
Bekijk gratis de handleiding van KStrong UFS310010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KStrong |
| Model | UFS310010 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
