Krüger&Matz KM2021 handleiding
Handleiding
Je bekijkt pagina 6 van 15
ENEN
Owner’s manualOwner’s manual
10 11
PRODUCT DESCRIPTION
MOUNTING THE DEVICE
1. Mount the device on dashboard, using the double sided
tape placed on the holder.
2. Make sure that the mounting area is free of dust and
dirt, then peel out the tape and place the device.
3. Plug one end of the car charger into the USB-C socket
in the device, then plug another end into vehicle's
cigarette lighter socket.
4. Adjust the camera lens.
Note: place the cable in a way, that it does not disturb the
drover while driving.
Rear camera:
Before installation, choose the correct place for
mounting. Mounting place has to be installed in a way,
that it does not obstruct eld of view. Rear camera can
be installed in two ways:
• On mounting tape. Peel o rst piece of paper from the
tape and stick it to the camera's mounting bracket. Peel
o second piece of paper from the tape and stick the
camera do selected place.
• On screws. Drill the holes in selected place and screw
in the camera. During drilling make sure, that no
damage is done to any wire, especially for safety
systems.
• After connecting the 2,5 mm plug to the AV socket in
the dashcam, the view from rear camera will appear on
the display. If red wire will be connected to the
reversing lights (for example with quick connector),
after shifting into reverse gear, the view from rear
camera will be enlarged, helping the driver with
maneuvering the vehicle. Note: for this function to
work, the red wire has to be connected to the same
electrical installation.
MICROSD CARD INSTALLATION
1. Place the microSD card in the proper slot of the device
and press gently, until it clicks. Make sure, that the
card is installed in correct way.
2. To take out the card, press it gently. When the card
slides out of the slot, take it out.
Notes:
• The microSD card in the device will be treated as
storage device. It is advised to format it rst.
• Use microSD cards with class 10 or higher, with
maximum capacity of 256 GB.
TURNING ON AND OFF
• To turn on the device:
◦ Press and hold the power button
◦ If the dashcam is connected to the cigarette lighter
socket, the camera will turn on automatically after
ignition and start recording.
• To turn o the device:
◦ Press and hold the power button
◦ If the camera is connected to the cigarette lighter
socket, after turning o the engine, the dashcam will
R
1
7
8
2
3
4
5
9
6
1. USB-C power socket
2. Reversing camera input
3. microSD card slot
4. AUX output
5. Power button
6. Camera lens
7. Reset button
8. Microphone
9. Speaker
Bekijk gratis de handleiding van Krüger&Matz KM2021, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Krüger&Matz |
| Model | KM2021 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1025 MB |
