Handleiding
Je bekijkt pagina 23 van 28
23Krowne • 100 Haul Rd. Wayne, NJ 07470 • krowne.com
Refrigeration Installation & Operating Manual
Installing Dispensing Faucets
1. Remove 1-1/8” nut from shank. Insert the shank into the
corresponding hole on the tower.
2. Install the nut onto the shank inside the tower. Install the
faucet onto the shank and tighten the nut inside the tower.
While doing this, make sure the faucets are straight or
aligned with each other.
4. Install a black insulation foam sheet into tower. Make sure
to insulate around the shank and the sides. Make sure to
pull the black round foam insulation up into the tower to
prevent air leaks.
5. Install beer lines and silicone washers (shank, washer,
tailpipe, beer line) onto shanks and tighten until snug.
Route the lines down into the column.
3. After all shanks are installed, used a spanner wrench
(Krowne model BC-902) to tighten the faucet onto the
shank itself.
Bekijk gratis de handleiding van Krowne BC36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Krowne |
| Model | BC36 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13211 MB |
