Handleiding
Je bekijkt pagina 21 van 28
21Krowne • 100 Haul Rd. Wayne, NJ 07470 • krowne.com
Refrigeration Installation & Operating Manual
1. Locate hex screws on the
underside of the stainless steel
top and unscrew with a 1/4” hex
screwdriver. (Skip steps 1-3 if
your unit has an unnished top)
3. Once all hex screws are removed,
lift stainless steel top up to remove.
CAUTION: When the top is removed,
the door(s) should pull away and drop
rapidly. We recommend having 2 or
more people assist with this step.
2. Unscrew the (3) 3/8” hex screws
that are located on the top frame
of each door using a 3/8” hex
screwdriver.
1. Locate the spring on the top frame of
your refrigeration unit.
2. Insert the top half into the
frame. Make sure the spring
is pulled back with the door.
3. Apply pressure and push
the bottom half in until you
hear it snap into place.
4. For unfinished top units: Align new door with the bottom hinge
and re-screw the top (3) 3/8” hex bolts to secure the door.
For stainless steel top units: Align new door with the bottom
hinge and re-screw the top (3) 3/8” hex bolts to secure the door.
Place the stainless steel top back onto the unit and secure with
the 1/4” hex bolts.
Tools Required: 1/4” Hex Screwdriver & 3/8” Hex Screwdriver
Tools Required: None
Changing a Swing Door
Changing a Sliding Door
Bekijk gratis de handleiding van Krowne BC24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Krowne |
| Model | BC24 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13211 MB |
