Handleiding
Je bekijkt pagina 13 van 112
ENGLISHKREATE SERIES 12
The monitor hums or makes other loud noises...
• Make sure that the power cord is plugged snugly into the IEC socket on the
rear of the monitor.
• Check the connections between the signal source and the monitor. Make
sure all connections are secure and that the cable is not damaged or wired
incorrectly.
• If you are using an unbalanced output to balanced cable conversion, make
sure it is correct. The shield is connected to the unbalanced ground of the
source and pins 1 and 3 of the XLR (or the sleeve and ring on the ¼” TRS jack).
• All audio equipment should use the same ground point. Check all other
devices using the same AC output in the building, like light dimmers, neon
signs, TV screens, and computer monitors. These devices should not be using
the same circuit.
• Verify that the signal cables are not routed near AC power lines or other EMI
sources (including wall power adapters and computers).
• Excessive hiss may be a result of an incorrect gain setting before the speaker
connection. Verify the source signal is not noisy before connecting the
monitors. This can be tested by connecting the signal source’s headphone
output to a set of headphones.
• Once you have a better idea of what may be at fault, then contact our service
department. They will help you determine the best solution to correct your
issue.
TROUBLESHOOTING BLUETOOTH ISSUES
The speakers aren’t connecting to my device…
• Check that Bluetooth is enabled on your device.
• Check that the speaker is not connected to another device (the blue LED
should be o). If it is, disconnect from that device rst and click “Forget this
device” in the Bluetooth menu before trying to pair it to a new device.
• If you have previously connected to this device, click “Forget this device” in
your device’s Bluetooth menu, then try to pair it again.
The speakers aren’t device-linking (Kreate 5 and 8 only)…
• Check that both speakers are powered on.
• Check that you are entering device link mode on both speakers (both speakers
have a blinking LED).
• Check that neither speaker is connected to any other devices.
Bekijk gratis de handleiding van KRK Kreate K8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | KRK |
| Model | Kreate K8 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 13228 MB |
