Kress KG346.9 handleiding
Handleiding
Je bekijkt pagina 20 van 60
20
EN
TROUBLESHOOTING TABLE
The following table gives checks and actions that you can perform if your machine does not operate correctly. If
these do not identify/remedy the problem, contact your service agent.
WARNING: Switch off and remove plug from power source before investigating fault.
Symptom Possible Cause Remedy
Chainsaw fails to
operate
Low battery charge.
Chain brake not in the proper
position.
Charge both the battery packs.
Check to see if the chain brake is in position
. Refer to CHAIN BRAKE for details.
Chainsaw
operates
intermittently
Over heating
Applying too much pressure
while cutting.
Loose connection.
Internal wiring defective.
On/Off switch defective.
Place the machine in a cool, ventilated place
to cool it down.
Applying relatively less pressure while
cutting.
Contact service agent.
Contact service agent.
Contact service agent.
Dry chain No oil in reservoir.
Vent in oil ller cap clogged.
Oil passage clogged.
Rell oil.
Clean cap.
Clean oil passage outlet.
Kickback Brake/Run
Down Brake
Brake does not stop chain Contact service agent.
Chain/chain bar
over-heats.
No oil in reservoir.
Vent in oil ller cap clogged.
Oil passage clogged.
Chain is over tensioned.
Dull chain.
Rell oil.
Clean cap.
Clean oil passage outlet.
Adjust chain tension.
Sharpen chain or replace.
Chainsaw rips,
vibrates, does not
saw properly.
Chain tension too loose.
Dull chain.
Chain worn out.
Chain teeth are facing in the
wrong direction.
Adjust chain tension.
Sharpen chain or replace.
Replace chain.
Reassemble with chain in correct direction.
Bekijk gratis de handleiding van Kress KG346.9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kress |
| Model | KG346.9 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8539 MB |
